Page 1
IMPORTANT MANUAL DO NOT THROW AWAY
ILLUSTRATED PARTS LIST
WARNING:
MODEL:
Read this Man u al and follow all Warnings
and Safety Instructions. Fail ure to do so
can re sult in serious in ju ry.
VF550
FRONT TINE TILLER
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan.com
12.21.10 CL
532 43 99-79 Printed in the U.S.A.
Page 2
DECALS
4
TILLER - - MODEL NUMBER VF550 (96082001501)
3
1
2
KEY PART
NO. NO. DESCRIPTION
1 532 43 00-07 Decal, Tine, Shield, Poulan
2 532 42 29-72 Decal, Tine, Shield, Warning
3 532 12 00-76 Decal, Warning, Rotating Tines
4 532 11 06-14 Decal, Hand Placement
- - 532 43 99-79 Manual, Owner's (Eng/Fren)
17
Page 3
TILLER - - MODEL NUMBER VF550 (96082001501)
ENGINE, TRANSMISSION, AND TINES
4
1
2
5
3
2
6
7
9
5
7
8
12
13
10
11
18
19
14
15
20
16
25
29
30
21
13
26
22
5
17
23
30
24
28
5
27
31
engine-transmission-tines_1
29
18
Page 4
TILLER - - MODEL NUMBER VF550 (96082001501)
ENGINE, TRANSMISSION, AND TINES
KEY PART
NO. NO. DESCRIPTION
1 - - - -- -- -- Engine B & S Model No. 10T802-1390-BI
2 872 11 06-08 Bolt Carriage 3/8 - 16 x 1
3 873 90 05-00 Nut Lock Flg 5/16 -18 unc
4 532 42 53-98 Plug Snap In
5 873 90 06-00 Nut Lock Flg 3/8 - 16 unc
6 532 43 54-71 Shroud Till Clutch
7 817 00 06-16 Screw 3/8 - 16 x 1-1/2
8 532 42 13-35 Sheave Upper
9 432 42 13-41 Stud Belt Guard
10 532 17 53-31 Bushing Pivot
11 532 42 13-73 Spring Return
12 532 42 13-39 Bracket Idler
13 874 61 06-16 Bolt Hex 3/8 - 24 x 1
14 532 42 13-79 Belt Drive
15 532 42 13-78 Pulley Idler
16 819 13 14-16 Washer 13/32 x 7/8 x 16 Ga.
17 874 78 06-20 Bolt 3/8 - 16 x 1.25
18 532 13 39-44 Washer .328 x 1.375 x 0.055
19 874 76 05-14 Bolt Fin Hex 5/16-18 x 7/8
20 532 43 62-81 Shield Tine
21 532 42 13-40 Seal Foam
22 819 41 35-24 Washer 13/32 x 1-1/2 x 11 Ga.
23 532 42 13-36 Sheave Lower
24 532 42 13-34 Coupling Clutch
25 532 15 69-26 Tine Outer RH
26 532 15 69-24 Tine Inner RH
27 532 15 69-25 Tine Outer LH
28 532 15 69-23 Tine Inner LH
29 532 04 92-90 Pin Clevis
30 532 12 46-60 Retainer Spring Zinc
31 532 42 53-99 Transmission
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm
19
Page 5
TILLER - - MODEL NUMBER VF550 (96082001501)
HANDLE, WHEEL, AND DEPTH STAKE
2
3
1
21
20
19
17
14
15
13
16
22
23
7
5
8
4
6
9
23
10
5
10
5
18
11
12
18
24
Handles-Wheels-Depth Stake_1_r1.ai
17
22
20
17
19
21
20
Page 6
TILLER - - MODEL NUMBER VF550 (96082001501)
HANDLE, WHEEL, AND DEPTH STAKE
KEY PART
NO. NO. DESCRIPTION
1 532 43 62-80 Console Tiller Handle
2 532 16 57-87 Grip Handle
3 532 43 13-32 Assembly Handle Column
4 872 01 05-20 Bolt 5/16 - 18 x 2.50
5 532 19 19-38 Knob Wing
6 532 42 50-91 Lever Control Tine
7 812 00 00-59 Retainer Ring
8 532 43 17-62 Pin Pivot
9 532 42 41-90 Handle Lower
10 532 42 53-98 Plug Snap In
11 532 43 25-21 Weldment Transport Arm
12 532 12 49-61 Clip Hairpin
13 532 42 13-42 Stake Depth
14 532 00 32-60 Pin Clevis
15 872 11 06-10 Bolt 3/8 - 16 x 1-1/4
16 874 78 06-40 Screw Hex Head 3/8 - 16 x 2.5
17 873 90 06-00 Nut Lock Flg 3/8 - 16 unc
18 872 14 05-36 Bolt 5/16 - 18 x 4.5
19 532 40 38-59 Wheel
20 819 17 14-16 Washer 17/32 x 7/8 x 16 Ga.
21 532 12 11-17 Bolt Shoulder "A" 2.28 " B" 1.53
22 532 42 13-45 Bracket Wheel
23 819 11 12-16 Washer 11/32 x 3/4 x 16 Ga.
24 532 43 49-48 Lever Control
NOTE: All component dimensions given in U.S. inches.
1 inch = 25.4 mm
21
Page 7
PARTS AND SERVICE
This product has been expertly en gi neered and carefully manu fac tured to rigid quality stan dards. As with all mechanical
products, some adjustments or part replacement may be necessary during the life of your unit.
For Parts and service, contact our authorized distributor: call 1-800-849-1297
• For replacement parts, have available the following information:
a. Model Number/Manufacturer's I.D. Number
b. Description of part.
For Technical Assistance: call 1-800-829-5886
For a Parts Manual, go to our website: www.poulan.com/support.asp
NOTE: HOP provides parts and service through its au thor ized dis tribu tors and dealers; there fore, all
requests for parts and service should be directed to your local dealer(s). The phi loso phy of HOP
is to con tinu ally improve all of its prod ucts. If the operating characteristics or the appearance
of your product differs from those described in this Manual, please contact your local dealer
for updated in for ma tion and as sis tance.
Loading...