Poulan Pro 415, 475 User Manual
Specifications and Main Features
- Type of Engine: 413
- Engine Capacity/Cub: 4.15 cu in. (65 cc)
- Engine Model: 475
- Displacement Volume: 4.7 cu in. (77 cc)
- Type of Spark Plug Used; Champion (RCJ-7Y)
- Spark Plug Gap Measurement: 0.027” (0.7 mm)
- Type of Ignition System Used: Solid State
- Permissible Range for Module Air Gap: 0.010” to 0.014”
- Type of Oil System: Adjustable Automatic
- Gasoline Blend for Motor: Gasoline/Oil Mixture — 40:1
- Muffler: Temperature Limiting/Spark Arresting - USDA Approved
Features to Ensure Safety
- Chain Brake
- Spark Arrestor
- Temperature Limiting Muffler
- Throttle Lock-Out
- Anti-vibration System
- Chain Catcher Pin
Frequently Asked Questions
Q: What ratio blend of fuel is advised for the Poulan Pro chainsaw?
A: The advised blend ratio of oil and gasoline for this chainsaw is 40:1.
Q: Which spark plug does the chainsaw have?
A: Champion spark plug RCJ-7Y model is used in the chainsaw.
Q: How do I lessen the risk of kickback while operating the chainsaw?
A: Working area should be free from obstruction, the chain should be sharpened properly and full throttle should be applied while commencing to cut to reduce kickback.
Q: How do I go about starting the chainsaw?
A: First make sure that your fuel tank is filled, the ignition switch is set to ‘START’, and the spark plug has not burned out. Additionally, you might have to modify the fuel line or clean out the fuel filter for better functioning.
Q: How long can I go without inspecting the air filter?
A: The air filter should be routinely inspected and replaced but considering boundary conditions such as operating in very dusty conditions one should clean the air filters every 10 tanks of fuel or after 5 hours of use.
User Manual
Loading...