Pottery Barn Weathered Play Console Assembly Instruction

pottery barn kids

WEATHERED NANTUCKET PLAY CONSOLE

PRE-ASSEMBLY:

• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in
conjunction with the assembly instructions.

• For your safety and ease, assembly by two adults is recommended.

• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care as

some parts or hardware may have sharp points or edges.

• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts to

misalign during assembly.

• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

PARTS INCLUDED:

• Wire Management Plug (pre-installe d) (A)

Note: As a safety precaution, please follow the instructions enclosed to secure the Play
Console to the wall using the tipping-restraint kit included.

ASSEMBLY INSTRUCTIONS:

1. To remove the wire management plug (A ), unscrew the pre-attached screws as shown.

TOOLS REQUIRED FOR ASSEMBLY:

• (1) Phillips Screwdriver

CARE INSTRUCTIONS:

• Dust often using a clean, soft, dry, lint-free cloth.

• Blot spills immediately, and wipe with a clean, damp, cloth.

• We do not recommend the use of chemical cl eansers, abrasives, or furnitur e polish on our lacquered finish.

Thank you for your purchase.

stores | catalog | www.potter ybarnkids.com

USA 1.800.290.8181