Pottery Barn Weathered Cubby and Base Assembly Instruction

pottery barn kids

WEATHERED NANTUCKET WALL CUBBY & CUBBY BASE

PRE-ASSEMBLY:

• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in
conjunction with the assembly instructions.

• For your safety and ease, assembly by two adults is recommended.

• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care

as some parts or hardware may have sharp points or edges.

• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts

to misalign during assembly.

• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

HARDWARE ENCLOSED:

• (A) Plates (2) 1-3/4” x 3 /4”

• (B) Allen Screw 1” (4)

Note: As a safety precaution, please follow the instructions enclosed to secure the
Headboard to the wall using the tipping-restraint kit included.

ASSEMBLY INSTRUCTIONS:

1. The wall cubby and cubby base are sold separately. If you have purchased both items, mending plates and screws
are provided for stacking purposes. Carefully align the wall cubby on top of the cubby base as shown. Secure with
mending plates (A) and screws (B) provided, using Allen Key (C).

TOOLS REQUIRED FOR ASSEMBLY:

• (C) Allen wrench, included (1)

CARE INSTRUCTIONS:

• Dust often using a clean, soft, dry, lint-free cloth.

• Blot spills immediately, and wipe with a clean, damp, cloth.

• We do not recommend the use of chemical cleansers, abrasives, o r furniture polish on our lacquered finish.

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

USA 800.290.8181