Pottery Barn Tortoise Stool Assembly Instruction

pottery barn kids

TORTOISE STOOL

PRE-ASSEMBLY:

• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the assembly instructions.

• For your safety and ease, assembly by two adults is recommended.

• Remove all part and hardware from the box and lay out on a clean, carpeted, or scratch- free work surface.

Use care as some parts or hardware may have sharp points or edges.

• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts and
hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause

the bolts misalign during assembly.

• The use of power tools for assembly is not recommended. Power t ools can damage hardware or split wood.

PARTS INCLUDED:

(A) Seat (1)
(B) Legs (4)

HARDWARE INCLUDED:

(C) Flat Washer (4)
(D) Spring Washer (4)
(E) Nut (4)
(F) Wrench (1)

ASSEMBLY INSTRUCTIONS:

1. Assemble each of the legs (B) to the seat (A) with (1) flat washer (C), (1) spring washer (D), and (1) nut

(E) using wrench (F).

(Fig.2)

B

A

B

A

C D E F

Page 1/2

2. Assembly is complete. Upright the stool and it is ready for use.

(Fig.3)

CARE INSTRUCTIONS:

• For daily care wipe with a soft dry cloth. Blot Spills immediately and wipe with a clean dry cloth.

• Store in a dry, covered area when not in use.

• We do not recommend the use of chemical cleansers, abrasives, or furniture polish.

• Over time, the product may begin to gray. To nourish the wood, wash with soap and water. When dry,

apply a coating of teak oil with a clean cloth. Remove excess oil by blotting with a soft, clean cloth.

Thank you for your purchase

stores l catalog l www.potterybarnkids.com

USA 1.800.290.8181

Page 2/2