Pottery Barn Thomas Wall Media Base Hutch Assembly Instruction

pottery barn kids

D

C

thomas wall system media base & hutch

PRE-ASSEMBLY:

• Please read all instructions carefully before assembling.

• For your safety, assembly by two people is recommended.

• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or

hardware.

• The use of power tools during the assembly of this item can cause the hardware to strip or the wood to split.
Please proceed with extreme care.

• The wall system should not be moved unless the connector screws are removed.

PARTS REQUIRED : HARDWARE ENCLOSED :

• (A) Media Hutch – 1pc

• (B) Media Base Left – 1pc

TOOLS REQUIRED:

• Philips head screwdriver (not included)

ASSEMBLY:

1. Using 2 people, carefully raise the Media Hutch (A) and set it onto the Media Base (B) as shown. Attach the T
mending plate (D) by aligning with the pre-drilled pilot holed. Use PHS screws (C) to fasten the connection by
applying gentle pressure to bore through the pilot holes and into the cases. Do not over tighten. Repeat the
same procedure for the other side. (Fig.1)

2. Assembly is complete. (Fig. 2)

(Fig. 1)

• (C) PHS M4 x 16mm – 8pcs

• (D) T Mending Plate – 2pcs

(Fig. 2)

CARE INSTRUCTIONS:

• Dust with a clean, soft cloth

• Avoid the use of chemicals and harsh cleaning agents

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

USA 1.800.290.8181