Pottery Barn Thomas Storage Desk Hutch Assembly Instruction

pottery barn kids

THOMAS STORAGE DESK

PRE-ASSEMBLY:

• Please read all instruction before beginning assembly. The illustrations provided allow for easier
assembly when used in conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work su rface, as this
will avoid damaging any parts during assembly. The shipping box provides and ideal work surface. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware. NOTE: knobs are placed inside the drawers for shipping.

• For your safety and ease, adult assembly by two people is recommended.

• Save all packing materials until assembly is complete to avoid accidentally discar ding smaller parts or

hardware.

• Use the parts and hardware lists to identify and sep arate each of the pieces included prior to starting
assembly.

• Note: DO not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware of split
wood.

PARTS INCLUDED:
(A) Top panel – 1pc (B) Left side panel – 1pc

(C) Right side panel – 1pc (D) Cabinet with drawer – 1pc

(E) Keyboard tray – 1pc

(F) Back panel – 1pc (G) Foot – 4pcs

TOOLS REQUIRED:
Phillips head screwdriver (not included)
Allen Key (included)

HARDWARE ENCLOSED:
(H) Allen Bolts 1/4”x32x15mm – 16pcs

(I) Allen Key 4x74x29mm – 1pc

(J) Phillips head screw 8x38mm – 2pcs

ASSEMBLY INSTRUCTIONS:

1. Attach the Feet (G) to the Side panel as shown. (Fig. 1)

2. Remove the drawers from the Cabinet (D) as shown. (Fig. 2)

(Fig. 1)

(Fig. 2)