Pottery Barn Thomas Storage Bed Assembly Instruction

pottery barn kids

THOMAS STORAGE BED

PRE-ASSEMBLY:
Please read all instruction before beginning assembly. For your safet y and ease, assembly by two-person is
recommended. Save all packing materials until assembly is complete to avoid accidentally discarding
smaller parts or hardware. Use caution when using power tools to aid in assembly. Power tools can split
wood or strip hardware if not used carefully.

PARTS INCLUDED:

A - Headboard (1)
B – Footboard (1)
C – Double side rail (1)
D – Single side rail (1)
E – Slat roll (1)
F – Storage box (3)
G – Finials (4)

HARDWARE INCLUDED:
H - Metal Bracket (3)

I –Small Phillips head screw (6)

J –Large Phillips head screw (28)

TOOLS NEEDED:
Phillips Head Screw Driver (not included)

1

ASSEMBLY:
Step #1 through#4

1. Hold double side rail (C) and single side rail (D) up to slot s on the legs of the head board (A) and insert
the hooks of each side rail into the slots. Push down firmly on the top of side rails until they seat
themselves over the pins inside the legs slots as shown.

2. Repeat the sample procedure with footboard (B).

3. Insert the finial (G) into the top of the bedposts and turn to tighten.

4. Carefully lay the storage boxes (F) under the Single side rail (D) as shown and make the drawer front
and the side rail flush.

Step#5

5. Attach the metal bracket (H) to the si ngle side rail & storage box by the small Philips head screws (I)
and make sure the drawer box cannot slide inside.

2