pottery barn kids
thomas narrow base
PRE-ASSEMBLY
• Please read all instructions carefully before beginning assembling.
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface,
as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
• We recommend adult assembly by two people for your safety.
PARTS INCLUDED:
(A) Shelf – 1pc
Assembly:
1. Determine the desired height for the shelf (B). Note: Do not insert all the shelf pegs at once. Insert two
shelf pegs (C) into the pre-drilled holes on one side pushing firmly until fully inserted. (Fig 1).
2. Carefully tilt the shelf (A) by lowering one end of the shelf and place the shelf into the cabinet (Fig.1). Hold the
shelf in tilting position.
(Fig. 1)
3. Gently tilt the shelf by lowering the other end of the shelf until it seats onto the shelf pegs (B). Hold the other
end in upright position and insert two shelf pegs (B) into the pre-drilled holes until fully inserted. (Fig 2)
(Fig. 2)
4. Gently lower the shelf and rest the entire shelf onto the shelf pegs. (Fig 3)
A
(Fig. 3)
A
HARDWARE ENCLOSED:
(B) Shelf Pegs – 4pcs
B
B
If the floor is not perfectly even, the furniture may not sit level causing it to wobble. If the piece wobbles, determine
which corner does not touch the ground correctly. With two people follow these steps:
• Carefully elevate the item slightly to provide access to the levelers attached to the bottom.
• Turn the levelers in an counter-clockwise direction.
• Gently set down the piece and check stability.
• Repeat steps until the furniture sits firmly on the ground.
CARE INSTRUCTIONS:
• Use a soft dry or slightly damp cloth to clean periodically.
• To protect the finish always avoid the use of chemical and abrasive cleansers.
Thank you for your purchase
stores | catalog |
www.potterybarnkids.com
USA 1.800.290.8181