Pottery Barn Thomas Armoire Wall System Assembly Instruction

pottery barn kids

BAC

D

thomas wall system armoire

PRE-ASSEMBLY:

• Please read all instructions carefully before assembling.

• For your safety, assembly by two people is recommended.

• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or

hardware.

PARTS REQUIRED : HARDWARE ENCLOSED :

• (1) Armoire (A)

• (1) Left Cabinet & Hutch (B)

• (1) Right Cabinet & Hutch (C)

TOOLS REQUIRED:

• Philips head screwdriver (not included)

NOTE: Before putting the Connector screw (D), please check to ensure the 3 units (A/B/C) are leveled. By adjusting
the leveler at the bottom of each unit, once the horizontal levels of all 3 units (A/B/C) are achieved, you can fasten the
connector screw (D).

ASSEMBLY:

1. Bring all the pieces together. Determine the final position of Wall System. Align the pre-drilled holes on each
piece. (Fig. 1)

2. Unscrew each the connector screw (D). Place the female half on the inside of the Armoire (A) and the male
half on the inside of the Right cabinet hutch (C). Tighten the two pieces together. Repeat with remaining
connector screws for the opposite side. (Fig. 2)

3. Assembly is complete. (Fig. 3)

Figure 1

Figure 2

Figure 3

• (1) Connector screw (D)

Front

Note: The wall system should not be moved unless the connector screws are removed.

The use of power tools during the assembly of this item can cause the hardware to strip or the wood to split. Please
proceed with extreme care.

CARE INSTRUCTIONS:

• Dust with a clean, soft cloth

• Avoid the use of chemicals and harsh cleaning agents

Thank you for your purchase

Stores | catalog | www.potterybarnkids.com

USA 1.800.290.8181