Pottery Barn Star Headboard Assembly Instruction

pottery barn kids

Star Headboard

Page

1/2

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

PRE-ASSEMBLY:



Read all instructionsbefore beginning assembly. The illustrationsprovided allow for easier assembly when

used in conjunction with the assembly instructions.



For your safety and ease, assembly by two adults is recommended.



Remove all parts

and hardware from the box and lay out on a clean, carpeted, or scratch

-

free work surface.

Use care as some parts or hardware may have sharp points or edges.



Do not dispose of any contents until assembly is completed to avoid accidentally discarding small p

arts or

hardware.



Use the parts and hardware lists to identify and separate each of the pieces included.



Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembl

y.The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

PARTS INCLUDED:

(A)

Star Headboard

1pc

PARTS

NEE

DED

(SOLD SEPARATELY)

:(B)Platform Bed wit

h

Tall

leg attached

1pc

(C)

Metal Frame Bed

1pc

HARDWARE INCLUDED:

(D)

Bolts M6 x

60mm4

pcs

(E) Flat Washer

8pcs(F)Spring Washer

8

pcs(G) 4mm Allen key

1pc(H)Nut

4pcs

(I) Wrench

1pc

ABA

C

pottery barn kids

Star Headboard

Page

2/2

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

ASSEMBLY INSTRUCTIONS:

1.

Place S

tar

Headboard (A) to the platf

orm (B) Headboard, insert flat washer (E),spring washer (F

) to

the bolt (D

). Insert the bolts into S

tar

headboard (A) predrilled hole and

tighten with

Allen key

(G).2.

Star

Headboard with platform

ready to use

3.

Place Star Headboard (A) to the Metal Bed Frame (C), insert spring washer (F), flat washer (E) to the

bolt (D). Insert the bolts into Star headboard

(A) predrilled hole.

Insert

flat washer (E),

spring

washer

(F)

, nut (H )

from the back of Scallop onto the bolt (D) and tighten

with Allen Key (G) and wrench (

I

).

CARE INSTRUCTIONS:



Dust often using a clean, soft, dry lint

-

free cloth.



Blot spills immediately, and wipe with a clean, damp, cloth.



We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered

finish.



Check fasteners periodically for tightness.

DO NOT over tighten.

This may cause disto

rtion or

breakage.



Parents should ensure a safe environment for the child by checking regularly, before placing the child

in the product, that every component is properly and securely in place.

Platform Footboard

(no hole outs

ide)

Platform

Head

board

(hole outside)

EFDGGDFEHFE

I