Pottery Barn Speed Boat II Nightstand Assembly Instruction

pottery barn kids

SPEED BOAT NIGHTSTAND

PRE-ASSEMBLY:

• Remove all parts and hardware from box and lay out on a carpete d or scratch-free work surfa ce (The
shipping box provides and ideal work surface), as this will avoid damaging any p arts during as sembly .
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small
parts or hardware.

• Two people are recommended for ease of assembly.

• Use the parts and hardware list s to ident ify and sep arate each of th e pieces inclu ded prior to starting

assembly.

• The illustrations provided allow for easier assem b ly when used in conjunction with the assembly
instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware of split
wood.

PARTS INCLUDED:
A – Top panel with drawer (x1)

B – Bottom panel(x1)

C – Front left leg & Rear ri ght leg (x2)
D – Front right leg & Rear left leg (x2)

TOOLS REQUIRED:
Phillips head screwdriver (not included)
E – Ball Tip Allen Key (included)

HARDWARE:

F –Allen bolt 1/4”x38x11.5mm (x12)

G – Half moon washer 1/4”x24x8mm (x12)

1

ASSEMBLY:

1. Lay the Top panel with drawer (A) down in the illustration below. Take away the drawer box as

shown.

2. Fix the Leg (C ) and (D) 1pcs each to the Top Panel (A) using 4pcs Allen bolt 1/4”x38x11.5mm (F) and
4pcs Half moon washer 1/4”x24x8mm (G), tighten with Allen key (E).

2