Pottery Barn Sectional Play Pit Assembly Instruction

pottery barn kids

SECTIONAL PLAY PIT

The Sectional Play Pit will be shipped in three cartons. One will contain the slipcover, and two
cartons will each contain two L-shaped inserts. These instructions assume you have received the
slipcover and the insert packages.

PARTS LIST

A. Play Pit slipcovers (4)
B. Shredded foam inserts (4)

Slipcover note: Your slipcover shi ps folded. If you would like to get the wrinkles out before
assembling, place the slipcover in a dryer on medium heat for 15 minutes with a damp towel.
Then assemble.

Buckle closure illustration:

ASSEMBLY INSTRUCTIONS:

The Play Pit slipcover has a trapezoidal shape and should be placed with the narrow side on top
and the wide side on bottom. There is a zipper on the bottom on the slipcover. Unzip the
slipcover and place the foam insert inside the cover. Fit the insert into the cover by first placing
one end in, then the other end, and then fit the cover around the insert and zip the slipcover
closed. Repeat with all four inserts, then place the inserts together end to end in the shape of a
square and fasten the belt buckles for maximum safety and comfort.

CARE INSTRUCTIONS:
To clean cover, remove interior parts. Machine wash cold, on gentle cycle, with like colors . Use

only non-chlorine bleach when needed. Tumble dry low. Replace interior parts in cover.

:

To Fasten the buckle To Release the buckle

Thank you for your purchase.

stores / catalog / www.potterybarnkids.com

[phone]