Pottery Barn Schoolhouse Storage Base Assembly Instruction

pottery barn kids

SCHOOLHOUSE STORAGE BASE

IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.

PARTS INCLUDED:
(1) Schoolhouse Case

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface as
this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.

• Use the parts and hardware lists above to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.

ASSEMBLY INSTRUCTIONS:

1. Carefully remove top 2 drawers from Schoolhouse Case as shown in illustration 1.

2. Remove the packing foam from the back of the bottom drawer as shown and slide the top two drawers back
into place as shown in illustration 2.

1. 2.

CARE INSTRUCTIONS:

• Dust with a clean, soft cloth.

• Avoid the use of chemicals and harsh cleaning a gents.

• Do not stand on the base.

Thank you for your purchase.

stores | catalog | www.potterybarnkids.com