Pottery Barn Schoolhouse Large Desk Assembly Instruction

pottery barn kids

SCHOOLHOUSE LARGE DESK

IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.

PARTS INCLUDED:
(1) Large Desk Top (A)
(2) Schoolhouse Case (B)

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface.
(The shipping box provides an ideal work surface), this will avoid damaging any parts during assembly. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.

• Use the parts and hardware lists above to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.

ASSEMBLY INSTRUCTIONS:

1. Carefully remove top 2 drawers from Schoolhouse Case (B) as shown.

2. Place Large Desk Top (A) on the top of Schoolhouse Case and secure by using (2) Allen Bolts, Flat
Washers & Spring Washers. Repeat another side. Note: The correct order for the washers to go on the
Allen Bolt is: Spring Washer first, Flat Washer second. Please see diagram.

3. Place 2 drawers of Schoolhouse Case back to complete the assembly.

CARE INSTRUCTIONS:

• Dust with a clean, soft cloth.

• Avoid the use of chemicals and harsh cleaning a gents.

• Do not stand on the base.

HARDWARE ENCLOSED:
(1) Allen Key (D)
(4) ¼” x 25mm Allen Bolts (E)
(4) ¼” Spring Washer (G)
(4) ¼” Flat Washer (H)

Thank you for your purchase.

stores | catalog | www.potterybarnkids.com

TOOLS REQUIRED FOR ASSEMBLY:
(1) Allen Key

1. 2.

3.