Pottery Barn Scallop Headboard Assembly Instruction

Pottery barn kids

Scallop Headboard

Page1/2

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

PRE-ASSEMBLY:



Read allinstructions before beginning assembly. The illustrations provided allow for easier assembly when

used in conjunction with the assembly instructions.



For your safety and ease, assembly by two adults is recommended.



Remove all parts a

nd hardware from the box and lay out on a clean, carpeted,or scratch

-

free work surface.

Use care as some parts or hardware may have sharp points or edges.



Do not dispose of any contents until assembly is completed to avoid accidentally discarding small pa

rts or

hardware.



Use the parts and hardware lists to identify and separate each of the pieces included.



Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly

.The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

PARTS INCLUDED:

(A)

Scallop Headboard

1pc

PARTS

NEE

DED

(SOLD

SEPARATELY)

:(B)Platform Bed

withTall

leg attached

1pc

(C)

Metal Frame Bed

1pc

HARDWARE INCLUDED:

(D)

Bolts M6 x

75mm4pcs

(E) Flat Washer

8pcs(F)Spring Washer

8

pcs(G) 4mm Allen key

1pc(H)Nut

4pcs

(I) Wrench

1pc

ABC

A

Pottery barn kids

Scallop Headboard

Page2/2

Thank you for your purchase

stores | catalog | www.potterybarnkids.com

ASSEMBLY INSTRUCTIONS:

1.

Place

Scallop Headboard

(A)

to the platform

(B) Headboard,

insert spring washer

(F),flat washer

(E)to the bolt

(D

). Insert the bolts into Scallop headboard (A) pre

drilled

hole and tighten with

Allen Key

(G).2.Scallop Bed

with platform

ready to use

3.

Place Scallop Headboard (A) to the Metal Bed Fr

ame (C), insert spring washer (F), flat washer (E) to

the bolt (D

). Insert the bolts into Scallo

p headboard (A) predrilled hole

.

, insert

flat washer (F), spring

washer (E

)

, nut(H)

from

the

back of Scallop onto the bolt (D

)

and tighten with Allen Key (G

)

and

wrench

(I).4.

CARE INSTRUCTIONS:



Dust often using a clean, soft, dry lint

-free cloth.



Blot spills immediately, and wipe with a clean, damp, cloth.



We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered

finish.



Check fasteners periodically for tightness.

DO NOT over tighten.

This may ca

use distortion or

breakage.



Parents should ensure a safe environment for the child by checking regularly, before placing the child

in the product, that every component is

properly and securely in place.

EFD

Platform Footboard

(no hole outside)

Platform

Head

board

(

with

hole outside)

G

GDFEHFE

I