Pottery Barn Riley Side Storage Unit Assembly Instruction

pottery barn kids
RILEY SIDE STORAGE UNIT
PRE-ASSEMBLY:
Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the asse mbly instruction s.
For your safety and ea se, assembly by two adults is recommended.
Use care as some parts or hardw a re may ha ve sh arp poin ts or edge s.
Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.
Use the parts and hardware lists to identify and separate each of the pieces included.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.
PARTS INCLUDED: (A) Side Storage U ni t – 1p c
(B) Removable Shelf– 1pc
TOOLS REQUIRED: Philips Screwdriver (Not included)
HARDWARE INCLUDED:
(C) Shelf Supporter – 4pcs
ASSEMBLY INSTRUCTIONS:
1. Insert (4) Shelf Supporters (C) in to th e pre-dri lled holes on interior sides of the Side Sto rag e Un it (A). Hold
the Removable Shelf (B) at an angle to place it on the Shelf Supporters (C) (Figure 1).
Figure 1
(D) Mending Bracket – 2pcs
(G) Wood Screw 3x12mm - 4pcs
A.
B.
B.
C.
Page 1/2
2. To connect the Side Storage Unit to a Riley Platform Bed, if desired, align bed and unit as shown. Place
(2) Mending Brackets (D) over the pre-drilled holes on legs of the both the Side Storage Unit and Platform Be. Secure with (4) Wood Screws (D) using Philips Screwdriver (Figure 2).
D.
E.
Figure 2
CARE INSTRUCTIONS:
Dust often using a clean, soft, dry lint-free cloth.
Blot s p i ll s imm ediately, and wi p e wi t h a c l ea n, damp, cloth.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered
finish.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
Page 2/2
Loading...