Pottery Barn Riley Loft Bed Assembly Instruction

pottery barn kids

RILEY LOFT BED

WARNING: Failure to follow these warnings and assembly instructions could result in

serious injury or death. To help prevent serious or fatal injuries from entrapment or falls:

• Read all instructions before assembling bunk bed. KEEP INSTRUCTIONS FOR FUTURE USE.

• Before each usage or assembly, inspect bunk bed for damaged hardware, loose joints, missing p arts

or sharp edges. DO NOT use bunk bed if any parts are missing or broken. Telephone or write to
Pottery Barn Kids for replacement parts and instructional literature if needed. DO NOT substitute
parts.

• Follow the information on the warnings appearing on the upper bunk end structure and on the carton.
DO NOT REMOVE WARNING LABEL FROM THE BED.

• Always use the recommended size mattress or mattress support, or both, to help prevent the
likelihood of entrapment or falls.

• Ensure thickness of mattress does not exceed 9” and the surface of the mattress is at least 5" (127
mm) below the upper edge of guardrails.

• Use only mattress which is 74"-75" long and 37.5"-38.5" wide on upper bunk.

• Surface of mattress must be at least 5 inches (127 mm) below the upper edge of the guardrails.

• The use of water or sleep flotation mattress is prohibited.

• Periodically check and ensure that the guardrail, ladder and other components are in their proper

position, free from damage, and that all connectors are tight.

• Never allow children under 6 years of age to use the upper bunk.

• Do not allow horseplay on or under the bed and prohibit jumping on the bed.

• Always use the ladder for entering and leaving the upper bunk.

• Use of a night light may provide added safety precautions for a child using the upper bunk.

• Prohibit more than one person on the upper bunk.

• Always use guardrails on both long sides of the upper bunk.

• If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be

placed against the wall to prevent entrapment between the bed and the wall.

• If refinishing, use a non-toxic finish specified for children’s products.

• STRANGULATION HAZARD – Never attach or hang items to any part of the bunk bed that are not

designed for use with the bed; for example, but not limited to, hooks, belts, and jump ropes.

PRE-ASSEMBLY:

• For your safety and ease, assembly by two adults is recommended.

• Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in

conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface. The shipping box provides
and ideal work surface. Do not dispose of any contents until assembly is completed to avoid accidentally discarding small
parts or hardware.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.

• Note: DO not fully tighten the bolts until all parts are in place. Failure to follow these instructions may cause the bolts to

misalign during assembly.

• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.

Page 1/4

PARTS INCLUDED:

(A). Headboard
(B). Footboard (with

Ladder)
(C). Front Guard Rail 1pc

1pc
1pc

HARDWARE INCLUDED:

(G). Allen Key– 1pc

(D). Rear Side Rail

1pc

(E). Rear Stretcher

1pc

(F). Slat Roll 1pc

(H). Allen Bolt M 8” x 110mm– 16pcs

(I). Barrel Nut – 16pcs

TOOLS REQUIRED:

Philips Screwdriver (Not included)

(J). Long Wood Screw 4 x 30mm – 56pcs

Page 2/4