Pottery Barn Riley Dresser Assembly Instruction
pottery barn kids
RILEY DRESSER
PRE-ASSEMBLY:
• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the asse mbly instruction s.
• For your safety and ea se, assembly by two adults is recommended.
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface.
Use care as some parts or hardw a re may ha ve sh arp poin ts or edge s.
• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.
PARTS INCLUDED:
(A) Dresser – 1pc
HARDWARE INCLUDED:
(B) Mending Bracket - 2pcs
(C) Wood Screw 3x12mm
TOOLS REQUIRED:
- 4pcs
Philips Screwdriver (Not included)
PARTS REQUIRED:
Riley Platform Bed (Sold separately)
ASSEMBLY INSTRUCTIONS:
1. To connect the Dresser to a Riley Platform Bed, if desired, align the dresser and bed as shown. Place (2)
Mending Bracket (B) over the pre-drilled holes on legs of the Dresser and Lounge Platform Bed,
securing with (4) Wood Screws (C).
B.
C.
CARE INSTRUCTIONS:
• Dust often using a clean, soft, dry lint-free cloth.
• Blot spills imme diately, and wi p e wit h a c lean, damp, cloth.
• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered
finish.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
Loading...