Pottery Barn Restaurant Highchair Assembly Instruction

pottery barn kids

restaurant high chair

! WARNING: Prevent serious injury or death from falls or sliding out.

• Always secure child in the restraint.

• Never leave child unattended.

• Always keep child in view while in high chair.

• The child should be secured in the high chair at all times by restraining system.

• If the high chair comes with a tray, the tray is not designed to hold the child in

the chair.

• It is recommended that the high chair be used only by children capable of

sitting upright unassisted.

! MISE EN GARDE: Prévenez les blessures graves ou

la mort provoquées par les chutes ou les glissements vers l’extérieur.

• Toujours attacher l’enfant.

• Ne jamais laisser l’enfant sans surveillance.

• Toujours garder l’oeil sur l’enfant lorsqu’il est dans la chaise haute.

• L’enfant doit toujours être attaché dans la chaise haute avec un système de

contention.

• Si un plateau est compris avec la chaise haute, le plateau n’est pas conçu pour

maintetenir l’enfant dans la chaise.

• oit utilisé que par des enfants capable de

Il est recommandé que la chaise ne s
s’asseoir convenablement sans aide.

CAUTION: Adult assembly required. This item contains small parts in the unassembled state
and care should be taken in the unpacking and assembly of the product.

PRE ASSEMBLY:

• Please read all instructions before beginning assembly.

• We recommend adult assembly by two people.

• Save all packing materials until assembly is complete to avoid accidentally discarding

smaller parts of hardware.
PARTS INCLUDED: HARDWARE ENCLOSED:
(A) Side Frame - 2 pcs (F) Screw 1 ½” - 10 pcs

(B) Lower Stretcher - 2 pcs
(C) Front Stretcher - 1 pc TOOLS REQUIRED:
(D) Seat Panel - 1 pc
(E) Backrest Panel - 1 pc Phillips screwdriver (not included)

ASSEMBLY INSTRUCTIONS:

1. Insert the right side of the Seat Panel

(D) into the groove on the Side Frame
(A).

2. Secure the connection using screw

(F), tightening fully with the
screwdriver (not included).

3. Repeat Steps 1 and 2 for the Lower

Stretcher (B), Front Stretcher (C) and
Backrest Panel (E).

4. Ensure the safety belt is completely

hanging down, and attach the left side
of the Lower Stretcher (B), Front
Stretcher (C) and Backrest Panel (E)
to the groove on the Side Frame (A’)

5. Repeat Step 2 to complete assembly.
CARE INSTRUCTIONS

• For daily care wipe with a soft dry
cloth. Wipe spills with clean, dry
cloth. Avoid the use of harsh
cleaners and abrasive.

• Store in a dry covered area when
not in use.

Thank you for your purchase

stores | catalog |

www.potterybarnkids.com

USA 1.800.290.8181