Pottery Barn Olivia Vanity Assembly Instruction
pottery barn kids
OLIVIA VANITY
PRE-ASSEMBLY:
• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in
conjunction with the assembly instructions.
• For your safety and ease, assembly by two adults is recommended.
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care
as some parts or hardware may have sharp points or edges.
• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instru ctions may cause the bolt s
to misalign during assembly.
• The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.
PARTS INCLUDED:
A –Mirror (1)
B – Base (1)
C – Legs (4)
HARDWARE:
D – Bolt 1/4”x32mm (3)
TOOLS INCLUDED:
E - Allen Key (included)
ASSEMBLY:
1. On a soft, scratch-free surface such as a carpet or rug, turn the Base (B) upside down. Thread the Legs (C)
into the pre-drilled holes at the bottom of Base (B) and tighten firmly.
(Figure 1)
B
C
Page 1/2
2. Carefully turn piece upright. Align the wooden dowels on Mirror (A) to the dowel holes on Base (B) as shown,
and place the Mirror onto the Base. Fasten with the (3) Bolts (D) using the Allen Key (E), as sho wn (Figure 2).
If needed, loosen or tighten the adjustable levelers on the bottom of the legs until the piece sits firmly on the
floor.
A
E
D
(Figure 2)
CARE INSTRUCTIONS:
• Dust often using a clean, soft, dry, lint-free cloth.
• Blot spills immediately, and wipe with a clean, damp, cloth.
• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
Thank you for your purchase.
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
Page 2/2
Loading...