pottery barn kids
OLIVIA TWIN / FULL BED
PRE-ASSEMBLY:
• For safety and ease, assembly by two adults is recommended.
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface. Use care
as some parts or hardware may have sharp points or edges.
• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included.
• Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in
conjunction with the assembly instructions.
• If using power tools to aid in assembly, please use caution. Power tools can damage hardware or split wood.
PARTS INCLUDED (Box #1):
(A ) Headboa rd - 1pc
PARTS INCLUDED (Box #2):
(B ) Footboard - 1pc
PARTS INCLUDED (Box #3):
(C) Siderail - 2pcs
(D) Legs - 6pcs
(E) Finials - 6pcs
(F) Slat roll - 1set
HARDWARE ENCLOSED (Box #3):
(G) Phillips Head Screw #8x25mm - 26pcs
TOOLS REQUIRED:
Phillips head screwdriver (not included)
ASSEMBLY INSTRUCTIONS:
1) Attach the legs (D) and finials (E) to the headboard (A) and footboard (B) as shown in Figure 1.
A
E
F
C
B
D
Figure 1
Page 1/2
D
2) Attach the siderails (C) to the headboard and footboard by inserting the hooked ends into the corresponding slots.
Ensure that the connections are secure, as shown in Figure 2.
Figure 2
3) Lay slat roll in place onto the inne r ledges o f the sid erails. Attach slats by inser ting the Phi llips screw s (G) through the
pre-drilled end holes and tightening with Phillips screwdriver (not included), as shown in Figure 3.
Figure 3
4) Periodically tighten all connections.
CARE INSTRUCTIONS:
• Clean periodically using a soft dry or slightly damp cloth.
• To protect the finish always avoid the use of chemical and abrasive cleansers.
Thank you for your purchase
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
Page 2/2