Pottery Barn Olivia Daybed Trundle Assembly Instruction
pottery barn kids
OLIVIA DAYBED
PRE-ASSEMBLY:
• Please read all instructions before beginning assembly. The illustrations provided allow for easier assembly when
used in conjunction with the assembly instructions.
• For your safety and ease, assembly b y tw o adults is r ecom mend ed.
• Remove all parts and hardware from box and lay out on a carpeted or scratch-fee work surface, as this will avoid
damaging any parts during assembly. The shipping box provides and ideal work surface. Do not dispose of any
contents until assembly is completed to avoid accidentally discarding email parts or hardware.
• Use the parts and hardware lists to identify and separate each of the pieces included.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts to
misalign during assembly.
• The use of power tools is not recommended. Power tools can damage hardware or split wood.
P ARTS INCLUDED:
(A) Back frame - 1pc
(B) Left side board - 1pc
(C) Right side board - 1pc
(D) Front rail - 1pc
(E) Legs - 6pcs
(F) Finials - 6pcs
(G) Slat roll – 1set
HARDWARE ENCLOSED:
(H) Phillips Head Screw # 8x30 mm - 26pcs
TOOLS REQUIRED:
Phillips head screwdriver (not included)
ASSEMBLY INSTRUCTIONS:
1. Attach the legs (E) and Finials (F) to the Back frame (A), Left side board (B) and Right side board (C) as shown in
Figure 1.
(Fig.1)
F
B, C
E
F
B
F
D
A
F
G
A
F
E
E
E
A
E
C
F
E
Page 1/3
2. Attach the Front rail (D) to the Left side board (B) and Right side board (C) by inserting the hooked ends into the
corresponding slots. Ensure that the connections are secure, as shown in Figure 2.
(Fig.2)
3. Attach the Left side board (B) and the Right side board (C) to the back frame (A) by inserting the hooked ends into
the corresponding slots. Ensure that the connections are secure, as shown in Figure 3.
(Fig.3)
B
A
B
D
B
B
D
C
A
C
Page 2/3
Loading...