Pottery Barn Newbury Twin Full Bed Assembly Instruction

pottery barn kids

NEWBURY TWIN OR FULL BED

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clear carpeted or scratch-free work surface. (The
shipping box provides an ideal work surface), this will avoid damaging any parts during assembly. Do not dispose of
any contents until assembly is completed to avoid accidentally discarding small parts or hardware.

• Two people recommended for ease of assembly.

• Use the parts and hardware lists to identify and separate each of the pieces included prior to starting assembly.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the

bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.

NOTE: Side rails have (2) settings:
Use the higher setting if not using a box spring mattress and/of if a trundle will be used with the bed.
Use the lower setting if using a mattress & box spring. We recommend a box spring if you want to use a bed skirt/box

spring cover or add height to the bed.

Our beds do not require a box spring at either setting since they include a slat roll foundation system, but one may be
used.

TOOLS REQUIRED:
Phillips head screw driver (Not included)

PARTS INCLUDED :
(1) Headboard
(1) Footboard
(2) Siderails
(1) Slat roll

(30) Phillips head screws (for twin size)
(28) Phillips head screws (for full size)

ASSEMBLY INSTRUCTIONS:

1. Place headboard at desired location in room.

2. Attach side rail by hooking end of side rail into slots on headboard
And applying downward pressure until rail fits tight into place.

3. Repeat procedure with other side-rail on the other side of headboard.

4. Now attach the other ends of side-rails to the footboard using the same

procedure as with the headboard.

5. Install slat roll in between side rails as shown.

6. Secure each slat by fastening (1) Phillips head screws through the

pre-drilled holes at each end of the slats and into the side-rails.

CARE:

• Dust with a soft dry cloth

• Use furniture wax as needed

• Avoid abrasives and solvent cleaners

• Wipe up spills immediately

Thank you for your purchase.

stores | catalog | www.potterybarnkids.com