pottery barn kids
nautical twin or full bed
PRE-ASSEMBLY
• Please read all instructions carefully before beginning assembly.
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface,
as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.
• We recommend adult assembly by two people for your safety.
• Save all packaging materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
PARTS ENCLOSED:
(A) Headboard – 1pc
(B) Footboard – 1pc
(C) Side Rail – 2pcs
(D) Slat Roll – 1pc
ASSEMBLY INSTRUCTIONS:
1. The bed is designed with two adjustable levels, one that accommodates a trundle (the higher slot), and one for
use with a box spring (the lower slot). Determine your desired setting and hold the Side Rail (C) up to
appropriate slots on the legs of the Headboard (A). Insert the hooks of each side rail into the slots. Push down
firmly on the top of side rails until they seat themselves over the pins inside the leg slots as shown. (Fig. 1)
Repeat this step with the footboard (B) and remaining Side Rail (C).
(Fig. 1)
HARDWARE ENCLOSED:
(E) Rattan screw M4 x 30 MM – 32pcs
TOOL REQUIRED:
Phillips Head Screwdriver (not included)
C
C
B
2. Lay the Slats (D) between the Side Rails (C) and use the Rattan screws (E) with a Philip’s Screwdriver (not
included) to fasten slats to the Side Rails. (Fig. 2)
3. Tighten all of the screws to make sure all secure and the bed structure is rigid. We recommend all screws be
checked periodically for safety.
(Fig. 2)
F
E
D
CARE INSTRUCTIONS:
• Dust with a clean, soft cloth.
• Bolt spills immediately, and wipe with a clean, damp, cloth.
• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered
finish.
Thank you for your purchase
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181