Page 1
pottery barn kids
MADISON CABINET
IMPORTANT SAFETY INSTRUCTIONS:
• Please read all instructions carefully before assembling.
• For your safety, assembly by two adults is recommended.
PRE-ASSEMBLY:
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work
surface, as this will avoid damaging any parts during assembly. The shipping box provides an ideal work
surface. Do not dispose of any contents until assembly is completed to avoid accidentally discarding small
parts or hardware.
• Use the parts and hardware lists above to identify and separate each of the pieces included.
• The illustrations provided allow for easier assembly when used in conjunction with the assembly
instructions.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split
wood.
HARDWARE ENCLOSED AND INCLUDED:
(A) Knob -1pc
(B) Knob screw - 1pc
(C) Hinge screw 12mm flat head - 4pcs
(D) Magnet - 1pc
(E) Magnet screw 12mm round head - 2pcs
(F) Metal piece - 1pc (assembled on the door)
(G) Metal piece screw 10mm flat head - 1pc
(H) Sleeve screw – 2pcs
(I) Sleeve nut – 2pcs
NOTE: One additional knob and knob screw are included for your convenience.
TOOLS REQUIRED:
(spare part)
(spare part)
(assembled on cabinet)
(assembled on cabinet)
(assembled on cabinet)
(assembled on the door)
Phillips Head Screwdriver (not included)
Page 2
ASSEMBLY INSTRUCTIONS:
1. T
he door can also be attached on right side. To do so, exchange the cabinet door with the door of the hutch.
Unscrew the door hinge and Magnet (D) from the cabinet. (Fig. 1)
Fig 1
2. Unscrew Metal piece (F) from the door. Fig 2.
Fig 2
Page 3
3. Reattach the hutch’s door to the right side of the cabinet. NOTE: When positioned correctly, the door’s Knob
(A) will be in the upper left corner of the door. Align the door’s hinge with the pre-drilled holes on the interior
right side of the cabinet and attach using the Hinge Screw (C). Reattach the Metal piece (F) to the door corner
by aligning the Metal Piece (F) with the pre-drilled holes on the door’s interior and attaching with Screw (G).
Reattach the Magnet (D) to the left side of the cabinet top’s underside, as shown below. Align the Magnet (D) to
the pre-drilled holes on the cabinet top’s underside and attach with the Screws (E). (Fig. 3)
4. Assembly is complete.
Fig 3
Fig 4
Page 4
5. You can combine this cabinet with another component of the Madison system using the included Sleeve
Screws (H) and Sleeve Nuts (I). To do so, align the two items. Insert the Sleeve Nuts (I) into the pre-drilled
countersunk holes on the end of other component of the Madison system. Then insert Sleeve screws (H) into
the pre-drilled countersunk holes on end of cabinet. Press the Sleeve Nut (I) and tighten the Sleeve Screws (H
with Phillips Head Screwdriver (not included). (Fig. 5
)
)
ARE INSTRUCTIONS:
C
• Dust often using a c
• Blot spills immediately, and wipe with a clean, da
• We do not recommend the use of chemical cleansers, abras
finish.
Do not sta
• nd on the shelves.
Fig 5
lean, soft, dry lint-free cloth.
mp, cloth.
Thank you for your purchase
stores s.com
| catalog |
www.potterybarnkid
USA 1.800.290.8181
ives, or furniture polish on our lacquered
Loading...