Pottery Barn Madison Short Bookrack Assembly Instruction

1

pottery barn kids

BOOKRACK SHORT

PRE-ASSEMBLY:



Remove all parts and hardware from box and lay out on a carpeted or scratch

-

free work surface (The

shipping box provides and ideal work surface)

, as t

his will avoid damaging any parts during assembly.

Do not d

ispose of any contents until assembly is completed to avoid accidentally discarding small parts

or hardware.



Two people

are

recommended for ease of assembly.



Use the parts and hardware lists to identify and separate each of the pieces included prior to sta

rting

assembly.



The illustrations provided allow for easier assembly when used in conjunction with the assembly

instructions.



Note:Do

not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to mis

align during assembly.



If using power tools to aid in assembly please use caution. Power tools can damage hardware of split

wood.

PARTS INCLUDED:

A–Bookrack Base

(x1)B–

Left side panel

(

x1)C–

Right

side panel (x1)

D–Frontrail (x3

)E–

Shelf with holes

(x1)F–Shelf w/o holes (x1

)

TOOLS

REQUIRED

:

Phillips head screwdriver (not included)

G–Ball Tip

Allen Key

(included)

HARDWARE:

H–Allen

bolt

1/4”x45

x15

mm (x4)

I–Allen

bolt 1/4

”

x32

x15

mm (x4)

2

J–Metal washer 1/4

”

x24x12x8

mm

(x4)K–Drywall Anchors

5/32”x63x14

mm

(x2)L–Screw 5/32

”

x53mm(x2)M–

Phillips head

wood

screw 8x38

mm (x2)

N–Paper template (x1)

ASSEMBLY:

1.

Laythe

Right

side panel (

C)

down as shown

in the illustration below

.

Attach

the

Shelf with holes (E)

and

Shelf w/o holes (F) to the

Right

side panel (

C)

using2pcs Allen bolt 1/4

”

x45x15mm (H)

and2pcs

Metal washer

1/4”x24x12x8

mm (J)

, tighten with

Allen key (G).

Make

sure

Shelf with holes (E)

at the

upper.