Pottery Barn Lion Chair Assembly Instruction

pottery barn kids
LION CHAIR
PRE-ASSEMBLY:
Read all instructions before beginning assembly. The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
For your safety and ease, assembly by two adults is recommended.
Use care as some parts or hardware may have sharp points or edges.
Do not dispose of any contents until assembly is completed to avoid ac cidentally discarding s mall parts and hardware.
Use the parts and hardware lists to identify and separate each of the pieces included.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts misalign during assembly.
The use of power tools for assembly is not recommended. Power tools can damage hardware or split wood.
PARTS INCLUDED:
(A) Bench Seat (1) (B) Leg Frame (2) (C) Back Rest (1)
HARDWARE INCLUDED:
(D) Bolt 50mm (12)
(E) 4mm Allen Key (1)
ASSEMBLY INSTRUCTIONS:
1. Carefully lay the seat (A) upside down on a carpeted or scratch-free surface. Secure the Leg Frames
(B) to the Seat (A) using Bolts (D), as shown in Figure 1. Tighten using Allen Key (E).
(Fig.1)
D
E
B
B
A
Page 1/2
C
D
B
A
E
2. Upright the chair, then secure the backrest (C) to seat (A) with 4 bolts (D). Make sure all bolts are in
the correct position, then tighten all bolts using Allen Key (E).
(Fig.2)
3. Assembly is complete.
(Fig.3)
CARE INSTRUCTIONS:
For daily care wipe with a soft dry cloth. Blot Spills immediately and wipe with a clean dry cloth.
Store in a dry, covered area when not in use.
We do not recommend the use of chemical cleansers, abrasives, or furniture polish.
Over time, the product may begin to turn gray. To nourish the wood, wash with soap and water. When
dry, apply a coating of teak oil with a clean cloth. Remove excess oil by blotting with a soft, clean cloth.
Thank you for your purchase
stores l catalog l www.potterybarnkids.com
USA 1.800.290.8181
C
D
E
Page 2/2
Loading...