Pottery Barn Larkin Sleigh Side Table Assembly Instruction
pottery barn kids
larkin sleigh pedestal side table
PRE-ASSEMBLY
• Please read all instructions carefully before beginning assembly.
• Remove all parts and hardware from the box and lay out on a clean, carpet ed, or scratch-free work surface, as this will
avoid damaging any parts during assembly. The shipping box provides an ideal work surface. Do not dispose of any
contents until assembly is completed to avoid accidentally discarding small parts or hardware.
• We recommend adult assembly by two people for your safety.
PARTS INCLUDED : HARDWARE ENCLOSED :
(A) Tabletop – 1pc
(B) Connector Plate – 1pc
(C) Center pole – 1pc
(D) Table base – 1pc
ASSEMBLY
1. Attach the Lower Base (D) to the Center pole (C) until the dowel is fully secured into the pre-drilled hole. (Fig. 1)
2. Use the Large flat washer (K) and Hexagon Head bolt (E) and fasten the connection with the enclosed Spanner
(J). (Fig. 2)
3. Attach the Connector Plate (B) to the Center pole (C), and fasten the Flat washer (F), Spring washer (G) and
JCBC Bolt (h) at each connection point with the enclosed Allen key (I). (Fig. 3)
(Fig. 1)
(Fig. 2)
(Fig. 3)
C
D
E
I
(E) Hexagon head bolt M8x160 mm – 1pc
(F) Flat washer – 8pcs
(G) Spring washer – 8pcs
(H) JCBC M6x25 mm Bolt – 8pcs
(I) Allen Key – 1pc
(J) Spanner – 1pc
(K) Large Flat Washer – 1pc
K
H
G
F
B
C
4. Attach the Tabletop (A) to the Connector Plate (B) and fasten the Flat washer (F), Spring washer (G) and JCBC
Bolt (H) at each connection point with the Allen key. (Fig. 4)
A
CARE INSTRUCTIONS:
• Use a soft dry or slightly damp cloth to clean daily.
• Wipe up spills immediately.
• To protect the finish always avoid the use of chemical and abrasive cleansers.
• The use of coasters is recommended to prevent the formation of moisture rings.
B
Thank you for your purchase
stores | catalog | www.potterybarnkids.com
USA 1.800.290.8181
F
G
H
I
Loading...