Pottery Barn Larkin Glider Assembly Instruction

pottery barn kids

A

Larkin Glider

IMPORTANT SAFETY INSTRUCTIONS:

• Please read all instructions carefully before assembling.

• For your safety, assembly by two adults is recommended.

PRE-ASSEMBLY:

• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface,
as this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface.

• Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.

• Use the parts and hardware lists above to identify and separate each of the pieces included.

• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.

• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause

the bolts to misalign during assembly.

PARTS INCLUDED: HARDWARE ENCLOSED:
(1) Top (A) (1) Allen Key (C)
(1) Base (B) (4) Allen Bolts (D)

ASSEMBLY INSTRUCTIONS:

1. Attach Top (A) to Base (B) and secure with (4) Allen Bolts (D) using the Allen Key (C).

CARE INSTRUCTIONS:

• Dust often using a clean, soft, dry lint-free cloth.

• Blot spills immediately, and wipe with a clean, damp, cloth.

• We do not recommend the use of chemical cleansers, abrasives, or furniture poli sh on our lacquered

finish.

stores | catalog | www.potterybarnkids.com

Thank you for your purchase

USA 1.800.290.8181

C

D

B