pottery barn kids
KENDALL
STORAGE CUBY
PRE-ASSEMBLY:
Please read allinstruction before beginning assembly.
The illustrations provided allow for easier assembly
when used inconjunction with the assembly instructions.
Remove allparts andhardware from bo
x and lay out on a carpeted or scratch
-
free work
surface,
as t
his will
avoid damaging any parts during assembly. The shipping box provides and ideal worksurface
.
Do notdispose
of any contents until assemblyis completed to avoid accidentally discarding s
mall parts orhardware.
For your safetyand
ease, adult assembly
by t
wo people is recommended.
Save allpacking materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Use the parts andhardware lists to identify
and separate each ofthe piecesincluded prior to starting
assembly.
Note: Do not fully tighten allbolts until all partsare inplace. Failure to follow these instructions may cause the
bolts to misalign duringassembly.
If using power toolsto aidin as
sembly please use caution. Power tools can damage hardware or split wood.
PARTS INCLUDED:
(A)
Top-1pc(B)
Left panel
-1pc(C)Right panel
-1pc(D)Top f
ront rail
-1pc
(E) Rail
–
1pc(F)Fixed shelf
1-1pc(G) Fixed shelf 2
–
1pc(H)Back penal
–
1pc
TOOLS
REQUIR
ED:
Phillips headscrewdriver (not included)
HARDWARE
ENCLOSED
:(I)1/4x1-1/4”
Bolts-6
pcs(J
) Washer 1/4mm
–6pcs
ABCDEFG
H
(K) Spring washer1/4mm
–6pcs(L)#3x20mm–22
pcs(M)4mm AllenKey
–
1pc
ASSEMBLY
INSTRUCTIONS
:
1.
Position the Side panel (B) and the fixed shelf
2(G
) exactly as shown (Fig.
1
) Align the pre
-
drilled holes on the Side
panel (B) with the pre
-
drilled holes
on thecleat on the fixed shelf
2(G
). Insert th
e Washer (
J
), Spring washer (
K
)
and
1/4x1-1/4”
Bolt (I) through pre
-
drilled holes on theside panel (B) and the pre
-
drilled holes on thecleat on
the fixed shelf
2(G
), tighten withthe Allen key (
M
) provided
.
Position the fixed shelf1 (F)exactly as sh
own (Fig.1) insert the wood dowel on the fixed shelf 1 into the pre
-
drilled holes onthe Side panel.
(Fig. 1)
IJKBG
F
2.
Position the
top front rail
(D)
& rail(E)
exactly asshown (Fig.
2).(Fig. 2)
3.Position thePanel (C) and the assembled frame (assembled in step 1) exactly as shown. (Fig.
3)Align the pre
-dri
lled holes onthe Sidepanel (C
) with the pre
-
drill
ed holes onthe assembled frame,
i
nsert the Washer (
J
), Spring
washer (
K
) and
1/4x1-1/4”
Bolt (I) through pre
-
drilled hole
s onthe side panel.
T
ightening withthe Allen key(
M)provided.
(Fig.3)
DEIKJ
C
4
. Attach the Top (A) onto the assembled frame (assembled in step
3
) by inserting the pre
-
attached wooden dowels on
the top horizontal railsof theside panels into the pre
-
drilled holes on theTop (A). Insert Allen Bolts into
the pre
-
drilled
holess at both ends ofthe Top. Once all bolts are in place, fully tighten t
h
em using the 4mm Allenkey (
M
) provided.
(Fig.4)5. Attach the Back Panel (
H
) to the back ofthe unit. Insert the Screws
through pre
-
drilled holes of the Back panel (
H)into the unit. Secure with Philips Head Screwdriver.
(Fig.5)
AIJKH
L
6.Adjust theAdjustable Levelers on the bottom of the Legs by loosening or tightening them so the
Kendall
StorageCuby
sit evenly on floor.
(Fig.6)
CARE INSTRUCTIONS:
Dust often usinga clean,soft, drylint
-
free cloth.
Blot spills immediately, and wipe with a clean, damp, cloth.
We do not recommend the use of chemical clean
sers, abrasives, or furniture polish on our lacquered
finish.
T
hank you for your purchase
stores | catalog | www.potterybarnkids.com
Loading...