pottery barn kids
KENDALL
1
SHELF BOOKCASE
PRE-ASSEMBLY:
Please read all instruction before beginning assembly.
The illustrations provided allow for easier assembly
when used in conjunction with the assembly instructions.
Remove all parts and hardware fro
m box and lay out on a carpeted or scratch
-
free work
surface,
as t
his will
avoid damaging any parts during assembly. The shipping box provides and ideal work surface
.
Do not dispose
of any contents until assembly is completed to avoid accidentally discardi
ng small parts or hardware.
For your safety and
ease, adult assembly
by t
wo people is recommended.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
Use the parts and hardware lists to ident
ify and separate each of the pieces included prior to starting
assembly.
Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the
bolts to misalign during assembly.
If using power tools to aid i
n assembly please use caution. Power tools can damage hardware or split wood.
PARTS INCLUDED:
(A)
Top-1pc(B)
Left panel
-1pc(C)Right panel
-1pc(D)Front rail
-1pc(E)Fixed shelf
-1pc(F)Back penal
–
1pc
TOOLS
REQUIR
ED:Phillips head screwdriver (not included)
HARDWARE
ENCLOSED
:(G)1/4x1-1/4”
Bolts-10
pcs(H
) Washer 1/4mm
–8pcs(I
) Spring washer 1/4mm
–8pcs
ABCDE
F
(K)
#3x19mm–20pcs(L
) 4mm Allen Key
–
1pc
ASSEMBLY
INSTRUCTI
ONS:1.
Position the Side panel (B) and the fixed shelf (
E
) exactly as shown (Fig.
1
) Align the pre
-
drilled holes on the Side panel
(B) with the pre
-
drilled holes on the cleat on the fixed shelf (
E
). Insert the Washer (
H
), Spring washer (
I
) and
1/4x1-1/4”Bolt (G) through pre
-
drilled holes on the side panel (B) and the pre
-
drilled holes on the cleat on the fixed shelf (
E),tighten with the Allen key (
L
) provided
Position the Front rail (D) exactly as shown (Fig.1).
(Fig. 1)
BDEGH
I
2.Position the Panel (C ) and the assembled frame (assembled in step 1) exactly as shown. (Fig.2) A
lign the pre
-
drilled holes on the Side panel (C ) with the pre
-
drilled holes on the assembled frame. Insert
the Washer (
H
), Spring
washer (
I
) and
1/4x1-1/4”
Bolt (G) through pre
-
drilled holes on the side panel, tightening with the Allen key (
L)provided.
(Fig. 2)
3
. Attach the Top (A) onto the assembled frame (assembled in step 2) by inserting the pre
-
attached wooden dowels on
the top horizontal rails of the side panels into the pre
-
drilled holes on the Top (A). Insert
Allen Bolts into the pre
-
drilled
hole
s at both ends of the Top. Once all bolts are in place, fully tighten t
h
em using the 4mm Allen key (
L
) provided.
(Fig.3)
CGIHDAGIH
4. Attach the Back Panel (F) to the back of the unit. Ins
ert the Screws through pre
-
drilled holes of the Back panel (F)
into the unit. Secure with Philips Head Screwdriver.
(Fig.5)5.
Adjust the Adjustable Levelers on the bottom of the Legs by loosening or tightening them so the
Kendall 1 Shelf
Bookcase
sit
evenly on floor.
(Fig.5)
CARE INSTRUCTIONS:
Dust often using a clean, soft, dry lint
-
free cloth.
Blot spills immediately, and wipe with a clean, damp, cloth.
We do not recommend the use o
f chemical cleansers, abrasives, or furniture polish on our lacquered
finish.
T
hank you for your purchase
stores | cata
log | www.potterybarnkids.com
F
K
Loading...