Pottery Barn Flower Knob Assembly Instruction

pottery barn kids

KNOB ASSEMBLY

HARDWARE KIT INCLUDED WITH EACH KNOB:

A. (1) 2” Screw break-off style
B. (2) Washer
C. 1 Knob

TOOLS REQUIRED (Not Included):
Note:

• Phillips head screwdriver

• Pliers

INSTALLATION INSTRUCTIONS:

1. Insert the Screw (A) through one Washer (B), through the pre-drilled hole located on the back of the drawer face
and then through the second washer. (Figure 1).

2. Attach the knob to the end of the screw that should be protruding out from the face of the drawer. If after tightening
the knob onto the screw, the knob does not sit flush against the drawer face, unscrew the knob and use pliers to
gently break the end section of the screw. (Note: Only grab the section that you intend break off so that you do not
damage the threads on the remaining screw sections.)

3. Repeat Step #2 as many times as necessary until the knob can be fully tightened against the drawer face.

Thank you for your purchase

Stores | catalog | www.potterybarnkids.com

1.800.290.8181