Pottery Barn Farmhouse Round Table Assembly Instruction
pottery barn kids
FARMHOUSE ROUND TABLE
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions carefully before assembling.
For your safety, assembly by two people is recommended.
PRE-ASSEMBLY:
• Remove all parts and hardware from the box and lay out on a clean, carpeted, or scratch-free work surface, as
this will avoid damaging any parts during assembly. The shipping box provides an ideal work surface. Do not
dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware.
• Use the parts and hardware lists above to identify and separate each of the pieces included.
• The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
• Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause
the bolts to misalign during assembly.
• If using power tools to aid in assembly please use caution. Power tools can damage hardware or split wood.
ASSEMBLY INSTRUCTIONS:
1. Carefully place the Tabletop (A) face-down on your work surface.
2. Secure the Leg (B) to the Tabletop (A) by placing a Flat Washer (F), a Spring Washer (E), and a Bolt (D),
and securing with the Allen Key (C). The Flat Washer (F) should be the washer touching the table. Repeat
with the remaining (3) Legs (B).
3. Carefully upright the table, verifying all connections are tightly fastened
PART LIST
(A) Table Top – 1pc
(B) Leg – 4pc
HARDWARE LIST
(C) Allen Key
(D) Bolt 5/16“ x 63mm
(E) Spring Washer 5/16“
(F) Flat Washer 5/16“ - 8pcs
- 1pc
- 8pcs
- 8pcs
F.
E.
D.
B.
B.
A.
CARE INSTRUCTIONS:
• Dust with a clean, soft cloth.
• Bolt spills immediately, and wipe with a clean, damp, cloth.
• We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered finish.
• Do not stand on the tabletop at any time.
Thank you for your purchase
stores | catalog | www.potterybarnkids.com
B.
C.
B.
USA 1.800.290.8181
Loading...