Pottery Barn Emery Desk Hutch Assembly Instruction

pottery barn kids

EMERY DESK

PRE-ASSEMBLY:

• Please read all instruction before beginning assembly. The illustrations provided allow for easier
assembly when used in conjunction with the assembly instructions.

• Remove all parts and hardware from box and lay out on a carpeted or scratch-free work su rface, as this
will avoid damaging any parts during assembly. The shipping box provides and ideal work surface. Do
not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or
hardware.

• For your safety and ease, adult assembly by two people is recommended.

• Save all packing materials until assembly is complete to avoid accidentally discar ding smaller parts or

hardware.

• Use the parts and hardware lists to identify and sep arate each of the pieces included prior to starting
assembly.

• Note: DO not fully tighten all bolts until all parts are in place. Failure to follow these instructions may
cause the bolts to misalign during assembly.

• If using power tools to aid in assembly please use caution. Power tools can damage hardware of split
wood.

PARTS INCLUDED:
(A) Top panel – 1pc (B) C

(C) Left side panel – 1pc (D) Keyboard tray with frame – 1pc

abinet with drawer – 1pc

(E) Back panel – 1pc (F) Shelf – 1pc

TOOLS REQUIRED:
Phillips head screwdriver (not included)

HARDWARE ENCLOSED:
(G) Allen Bolts 1/4”x32mm – 15pcs

(H) Allen Key 4x74x29mm – 1pc

(I) Small Phillips head screw 8x32mm – 4pcs

(J) Shelf support – 4pcs

(K) Wooden dowel 10x40mm – 2pcs

ASSEMBLY INSTRUCTIONS:

1. Remove the Keyboard tray (D) from the frame and the drawer from the drawer compartment on the
Cabinet (B) as shown.

2. Attach the Keyboard tray frame (D) to the Cabinet (B) using Allen bolts (G) and Allen key (H). See
illustration below. Insert the w

ooden dowels (K) to the Cabinet (B).