Pottery Barn Chesapeake Large Square Table Assembly Instruction
pottery barn kids
CAUTION : Adult assembly required. This item contains small parts in the unassembled state and care sh ould
be taken in the unpacking and assembly of the product.
PRE ASSEMBLY
• Please read all instructions before beginning assembly.
• For ease of assembly two people are recommended.
• Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or
hardware.
PARTS INCLUDED:
(A) Tabletop - 1pc
(B) Legs - 4pcs
ASSEMBLY INSTRUCTIONS:
1. Carefully place the Tabletop (A) upside down on a soft flat surface, such as a rug or carpet.
2. Insert the bolts of one of the Legs (B) through the hole in the corner on the underside of the Tabletop.
3. Place (1) washer (C), (1) Spring Washer (D) and (1) Nut (E) over each bolt. Secure the connection with the
Wrench (F) provided. (Fig. 1)
4. Repeat Steps 2 and 3 with the remaining Legs (B) and tighten connections securely.
5. Bring table to an upright position and re-tighten all connections. (Fig. 2)
CARE INSTRUCTIONS:
• For daily care wipe with a soft dry cloth. Wipe spills with clean, dry cloth. Avoid the use of harsh
cleaners and abrasive.
• Should the finish of outdoor furniture change year over year, apply teak oil or your choice of furniture
stain to restore the natural luster and beauty of the wood. For maximum results, we recommend
carefully following the labeled instructions for correct applications of the teak oil or furniture stain you
choose to purchase.
• Store in a dry, covered area when not in use.
chesapeake large square table
HARDWARE ENCLOSED:
(C) Washer Ø17/8 x 2 mm
(D) Spring Washer Ø14/8 x 2 mm
(E) Nut #12 mm
(F) Wrench #12 mm
Thank you for your purchase
stores | catalog |
www.potterybarnkids.com
USA 1.800.290.8181
- 4pcs
- 4pcs
- 4pcs
- 1pc
Loading...