Potterton Performa System HE User Manual

User’s Guide

Performa

System HE

This is a Wall Mounted Powered Flue Condensing Boiler Gas Fired Central Heating Unit.

The boiler meets the requirements of Statutory Instrument “ The Boiler (Efficiency) Regulations 1993 No3083” and is
deemed to meet the requirements of Directive 92/42/EEC on the energy efficiency requirements for new hot water
boilers fired with liquid or gaseous fuels:-

Type test for purpose of Regulation 5 certified by:
Notified Body 0051.

Product/Production certified by:
Notified Body 0051.

For use in GB/IE only.

2

Publication No. 5111818

Natural Gas

Potterton Performa System 12 HE

G.C.No41 591 24

Potterton Performa System 18 HE

G.C.No41 591 25

Potterton Performa System 24 HE

G.C.No41 591 26

Potterton Performa System 28 HE

G.C.No41 591 27

IMPORTANT - Installation, Commissioning, Service & Repair

This appliance must be installed in accordance with the
manufacturer’s instructions and the regulations in force. Read
the instructions fully before installing or using the appliance.

In GB, this must be carried out by a competent person as
stated in the Gas Safety (Installation & Use) Regulations.

Definition of competence: A person who works for a CORGI
registered company and holding current certificates in the
relevant ACS modules, is deemed competent.

In IE, this must be carried out by a competent person as
stated in I.S. 813 “Domestic Gas Installations”.

Lifting - This product should be lifted and handled by two
people. Stooping should be avoided and protective equipment
worn where necessary. Carrying & lifting equipment should be
used as required, e.g. when installing in a loft space.

The addition of anything that may interfere with the normal
operation of the appliance without express written permission
from the manufacturer or his agent could invalidate the
appliance warranty. In GB this could also infringe the Gas
Safety (Installation and Use) Regulations.

Warning - Check the information on the data plate is
compatible with local supply conditions.

Benchmark Commissioning Checklist

Please ensure that your installer hands you the boiler
Installation & Service Instructions with the Benchmark
Commissioning Checklist sections completed. The details in
the Checklist will be required in the event of any warranty
work. Keep the instructions in a safe place and ensure that the
Service Interval Record at the back is completed at each
service visit.

CORGI

All CORGI registered installers carry a CORGI identification
card and have a registration number. You can check your
installer is registered by telephoning 0870 4012300 or writing
to:-

1 Elmwood,

Chineham Business Park,

Crockford Lane,

Basingstoke. RG24 8WG

or check online at www.corgi-gas-safety.com

This product has an energy rating (B) on a scale of A to G.

For more information see www.boilers.org.uk. This is a certification mark.

3

Publication No. 5111818

In an Emergency

If a water or gas leak occurs or is suspected, the boiler
can be isolated at the inlet valves as follows;

1. Turn off the electrical supply and turn the selector
switch on the facia box to the Off position.

2. Using a suitable open ended spanner or screwdriver
turn the square on the gas tap to the left to isolate the
gas supply at the boiler (Fig. 1).

3. The isolating valves are positioned under the boiler
and can be closed by turning their taps to the right
towards the wall (Fig. 2).

4. Call your Installer or Service Engineer as soon as
possible.

In case of gas leaks

1. If a gas leak is found or suspected, turn off the gas
supply at the meter immediately and at the isolating
valve on the boiler if possible. Contact your Gas
Supplier immediately.

Servicing your Appliance

1. For reasons of safety and economy your appliance
should be serviced annually. Servicing must be
performed by a competent person. Your Installer or
Service Engineer will be able to advise you.

2. Any purpose provided ventilation should be checked
periodically to ensure that it is free from obstruction.

Electricity Supply

1. THIS APPLIANCE MUST BE EARTHED.

2. A standard 230V ~ 50Hz supply is required. The
appliance must be protected by a 3 amp fuse.

Never Hang Flammable Items Over The Appliance

Gas Tap

Heating Flow and

Heating Return

Isolating Valves

Fig. 1

Fig. 2

4

Publication No. 5111818

Introduction

1. Your Potterton Performa System HE is a gas fired,
room sealed, powered flue boiler, providing central
heating and hot water for your home. It is fully
automatic and does not have a pilot light.

2. Due to the high efficiency and resultant low flue
gas temperature when in condensing mode a white
plume of condensate will be emitted from the
terminal. This will be particularly evident during
periods of low outside temperature.

Facia Panel

1. The facia panel is behind the hinged lower door
panel. As well as the On/Off/Reset selector switch,
temperature control knob and pressure gauge, the
facia incorporates nine neon indicator lights.

2. Neons 10, 11 & 12 indicate the operational status
of the boiler. Neons 4 to 9 have a dual function,
indicating the temperature of the central heating
water when constantly illuminated. If a fault develops
the appropriate neon will begin to flash.

2

1

0

4

3

bar

30° 40° 50° 60° 70° 80°

Reset

Fig. 3

30° 40° 50° 60° 70° 80°

1. On/Off/Reset Selector Switch

2. Temperature Control

3. Central Heating System Pressure Gauge

Neon Indicators

4. Flame Failure or Blocked Condensate Drain

5. Safety Thermostat Activated (Boiler or Flue)

6. Fault on Fan or Flue

7. Fault on Pump or Low System Pressure

8. Fault on Temperature Sensor

9. Fault on Temperature Sensor

10. Power On

11. Boiler On

12. Burner On

When neons 4 to 9 are constantly illuminated,
they indicate the temperature of the central
heating water.

213

456 7 9

10 12

8

11

KEY TO FACIA PANEL (Fig. 3)

Hinged Lower
Door Panel

Facia Panel