⦾⦾ ELECTRICAL SPECIFICATION
ELECTRICAL SPECIFICATION
MODEL
FTPC75V12-C
FTPC75V24-C
OUTPUT
Rated Voltage
12V
24V
Rated Current
5.83A
3.13A
Current Range
0 ÷ 5.83A
0 ÷ 3.13A
Rated Power
69.96W
75.12W
No Output Voltage (max.)
12.6V
25.2V
Line Regulation
± 1%
Load Regulation
± 2%
Voltage Tolerance [3]
± 5%
Ripple & Noise (max.) [2]
150mV
P-P
250mV
P-P
Setup, Rise Time [4]
500ms, 20ms / 230VAC at full load
Hold up Time (typ.)
15ms / 230VAC at full load
INPUT
Voltage Range
180 ÷ 264VAC
Frequency Range
47 ÷ 63Hz
Power Factor (typ.)
PF > 0.9 / 230VAC at full load
Efficiency (typ.)
85%
85%
AC current (typ.)
0.5A / 230VAC
Inrush current (max.)
75A / 230VAC(25°C)
No Load Power Consumption (max.)
0.21W
PROTECTIONS
Over Current
Range: 110 ÷ 150%
Type: hiccup mode. Recovers automatically after fault condition is removed.
Short Circuit
Type: hiccup mode. Recovers automatically after fault condition is removed.
Over Voltage
14 ÷ 20V 28 ÷ 40V
Type: shut down output voltage.
Recovers automatically after fault condition is removed.
Over Temperature
Range: 110°C ± 10°C
Type: shut down output voltage. Re-power on to recovery.
1/2
FTPC75V
s e r i es
70W LED Switching Power Supply (CV)
F TP C7 5 V- C- sp ec -E N - R 1 29 .0 8 . 2 01 7
■ Features:
• Constant voltage design
• European AC input range
•
Protections: Short circuit / Overload / Over voltage / Over temperature
• Cooling by free air convection
• Compliance to worldwide regulations for lighting
WORKING ENVIRONMENT
Working Temperature
-20°C ÷ +45°C
Working Humidity
45 ÷ 85% RH non-condensing
Storage Temperature and Humidity
-30°C ÷ +70°C, 10 ÷ 95% RH non-condensing
SAFETY AND EMC REGULATIONS
Safety Standards
Compliance to EN61347-1, EN61347-2-13 , EN 62493
Withstand Voltage
IN/OUT: 3.75kVAC
EMC Emission
Compliance to EN55015
EMC Immunity
Compliance to EN61547
Harmonic Current
Compliance to EN61000-3-3; EN61000-3-2
OTHERS
Dimensions
170 x 44.5 x 28.5mm (L x W x H)
Weight and Packing
0.25kg; 25pcs./box; box dimensions: 23.5 x 17.5 x 16.5cm
EAN Code
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF i 47μF parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. Setup and rise time is measured from 0 to 90% rated output voltage.
5.Power supply is considered as component not indented to apply by end-user. Power supply meets safety and EMC standards however the final equipment with power supply must be
re-quality to comply with EMC Directives.
⦾⦾ MECHANICAL SPECIFICATION
MECHANICAL SPECIFICATION
PIN ASSIGNMENT
No. Assignment No. Assignment
1 Input: AC/N 3 Output: U
OUT
-
2 Input: AC/L 4 Output: U
OUT
+
2/2
FTP C 7 5 V
s e r i e s
70W LED Switching Power Supply (CV)
F T PC 75 V- C- sp e c- EN -R 1 2 9. 08 . 20 17
Loading...