⦾⦾ ELECTRICAL SPECIFICATION
ELECTRICAL SPECIFICATION
MODEL
FTPC20V12-FP
FTPC20V24-FP
OUTPUT
Rated Voltage
12V
24V
Rated Current 1.67A 0.83A
Current Range 0.0 ÷ 1.67A 0.0 ÷ 0.83A
Rated Power 20W 20W
No Load Output Voltage (max.) 12.2V 24.2V
Line Regulation ± 1%
Load Regulation ± 2%
Voltage Tolerance [3] ± 5%
Ripple & Noise (max.) [2] 300mV
P-P
Setup, Rise Time [4] 100ms, 200ms / 230VAC at full load
Hold up Time (typ.) 5ms / 230VAC at full load
INPUT
Voltage Range
180 ÷ 264VAC
Frequency Range 47 ÷ 63Hz
Power Factor (typ.) PF > 0.5 / 230VAC at full load
Efficiency (typ.) 85%
AC current (typ.) 0.3A / 230VAC
Inrush current (max.) <60A / 230VAC (25°C)
No Load Power Consumption (max.) < 1W
PROTECTIONS
Over Current
Range: > 150%
Type: Decrease output current. Recovers automatically after fault condition is removed.
Short Circuit
Type: Decrease output current. Recovers automatically after fault condition is removed.
1/2
FTPC20V-FP
s e r i e s
20W LED Switching Power Supply
F T P C 2 0 V- FP - spe c -EN -R1 22.0 8. 2 0 18
■Features:
• Constant voltage design
• European AC input range
•
Protections: Short circuit / Overload / Over temperature
• Compliance to ERP directive
• lifetime 30000hrs.
• IP44
WORKING ENVIRONMENT
Working Temperature
-20°C ÷ +45°C
Working Humidity 45 ÷ 85% RH non-condensing
Storage Temperature and Humidity -30°C ÷ +80°C, 10 ÷ 95% RH non-condensing
SAFETY AND EMC REGULATIONS
Safety Standards
Compliance to EN61347-1, EN61347-2-13
Withstand Voltage IN/OUT: 3.75kVAC
EMC Emission Compliance to EN55015
EMC Immunity Compliance to EN61547
Harmonic Current Compliance to EN61000-3-2, EN61000-3-3
OTHERS
Dimensions
127 x 44 x 14.5mm (L x W x H)
Weight and Packing 0.2kg; 100pcs./box
EAN Code
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF i 47μF parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. Setup and rise time is measured from 0 to 90% rated output voltage.
5.Power supply is considered as component not indented to apply by end-user. Power supply meets safety and EMC standards however the final equipment with power supply must be
re-quality to comply with EMC Directives.
⦾⦾ MECHANICAL SPECIFICATION
MECHANICAL SPECIFICATION
2/2
FTPC20V-FP
s e r i e s
20W LED Switching Power Supply
F T P C 2 0 V- FP - spe c -EN -R1 22.0 8. 2 0 18
5 902 1 35 12 5 694
5 902 135 12 5700
Loading...