Package Contents
17” fanless touch terminal with
Gen 7E or Gen 8E base stand (x 1)
Power adapter (x 1)
Power cord (x 1)
User manual (x 1)
Recovery DVD or Information
DVD (x 1)
Product Features
Intel Bay Trail-D J1900 2.0G CPU, Quad Core, 2MB Cache
DDR3L SO-DIMM slot x 1, max 8GB
True Flat PCAP touch with 10 points multi-touch
Support Windows 7, POSReady 7, Win 8.1 Industry, Linux per request
Gen 7E or optional Gen 8E foldable base (U.S. Patent #9004436)
16780903010 Ver. Original
http://www.posiflex.com
XT-3817
Fanless Touch Terminal
User Manual
1
Views of the XT-3817 with Gen 7E Base Stand
Front View
Rear View
Side View
XT-3817
P-Cap Touch Panel
Cable Cover
Neck Cover
Cable Exit
HDD Cover
Power Button
Brightness Adjustment Button ＋
Brightness Adjustment Button －
I/O Compartment
Cover
Cable Arrangement
Cover
LED indicator
Gen 7E Base Stand
2
Bottom View
Views of the XT-3817 with Gen 8E Base Stand
Front View
Rear View
XT-3817
P-Cap Touch Panel
Cable Holder
HDD Cover
Rubber Feet with Fixing Screw
Rubber Feet with Fixing Screw
Cable Exit
I/O Compartment
Cover
Cable Arrangement
Cover
Cable Cover
Neck Cover
Cable Exit
LED indicator
Gen 8E Base Stand
3
Side View
Bottom View
View of I/O Interface of XT-3817
Rubber Feet with Fixing Screw
USB Ports
DB9 COM Ports
VGA Port
CR Port
LAN Ports
12V BAT Port
DC IN
Power
Connector
Rubber Feet with Fixing Screw
UPS Battery
Compartment
Power Button
Brightness Adjustment Button ＋
Brightness Adjustment Button －
Power Adapter
Compartment
PoweredUSB
Compartment
4
Positioning your POS for a Perfect Viewing Angle
The adjustable base stands designed for XT-3817 come in two models,
Gen 7E/8E, and allow you to determine an ideal position for your terminal
using its unique tilt adjustment mechanism. As the below figures suggest, both
Gen 7E and Gen 8E base stands provide three standard positioning solutions
for your terminal: flat folded mode, low profile mode, and full extended mode.
XT-3817 with Gen 7E Stand Base
Flat folded mode
Low profile mode
Full extended mode
XT-3817 with Gen 8E Stand Base
Flat folded mode
Low profile mode
Full extended mode
In general, XT-3817 will be set up beforehand in flat folded mode before
packaged into the box for shipping. After it is unpacked, you may re-adjust the
terminal in either low profile mode or full extended mode according to your
situation. Below will provide instructions on how to adjust the specific base
stand connected to the POS system among different positioning modes. As a
reminder, please be careful not to touch the LCD panel while setting up the tilt
angle.
5
XT-3817 with Gen 7E Base Stand
1. Please refer to the following instructions on
how to switch among different positioning
modes to find an ideal viewing angle for XT3817 with Gen 7E base stand.Unpack XT3817, which is supposed to be set in flat folded
mode, out of the package box and then lay
your POS system on a flat surface.
2. Steady the base stand with one hand, and then
tilt the screen downwards.
3. Position your terminal in Full Extended mode.
3.1 After grabbing the bottom edge of the screen with your hand, gently
move the screen upward until the screen is locked into place with a
click sound.
3.2 Tilt the screen up or down to your desired
angle. Please do not press on the LCD panel
while setting up the tilt angle.
6
Loading...