Package Contents
14” XT-2614E/2614Q Android touch
terminal with Gen 7 base stand (x 1)
12V/40W Power adapter (x 1)
Power cord (x 1)
User Manual (x 1)
Product Features
Looks
Slimmer than ever, and with every curves and details carefully thought
out to make XT-2614 one of the most visually desirable terminals in the
market.
Flexibility
To provide unmatched flexibility, XT-2614 equips with the foldable base
that can be configured into Flat folded Mode, Low Profile Mode or Full
Extended Mode depending on the application.
Fanless Design
No more headaches on maintenance! Fanless design not only allows XT2614 to function well in harsh environment, it also enables the terminal
to run quietly in places such as hospitals, where silent operation is of
upmost importance.
16750901020 Ver. A0
http://www.posiflex.com
XT-2614E/2614Q
Touch Terminal
User Manual
1
Views of the XT-2614E/2614Q with Gen 7 Base Stand
Front View
Rear View
XT-2614E/2614Q
LCD Touch Panel
Cable Cover
Neck Cover
Cable Exit
Power Button
Brightness Adjustment Button ＋
Brightness Adjustment Button －
Reset Button for XT-2614Q only
LED indicator
Gen 7 Base Stand
2
Bottom View
View of I/O Interface of XT-2614E
View of I/O Interface of XT-2614Q
Cable Holder
USB Ports
DB9 COM Ports
OTG USB Port
LAN Port
Micro SD Card Slot
DC IN Power
Connector
Cable Exit
Rubber Feet with Fixing Screw
Rubber Feet with Fixing Screw
USB Ports
DB9 COM Ports
VGA Port
LAN Port
Micro SD Card Slot
OTG USB Port
Line out
Reset Button
DC IN Power
Connector
3
Positioning your POS for a Perfect Viewing Angle
The adjustable Gen 7 base stand designed for XT-2614E/2614Q allows you to
determine an ideal position for your terminal using its unique tilt adjustment
mechanism. As the below figures show, Gen 7 base basically provides three
standard positioning solutions for your terminal: flat folded mode, low profile
mode, and full extended mode.
XT-2614E/2614Q with Gen 7 Base Stand
Flat folded mode
Low profile mode
Full extended mode
In general, your POS system will be set up beforehand in flat folded mode and
then packaged into the box for shipping. After it is unpacked, you may readjust the terminal in either low profile mode or full extended mode according
to your situation. Below will provide instructions on how to adjust an ideal
angle for your POS system with Gen 7 base stand. As a reminder, please be
careful not to touch the LCD panel while setting up the tilt angle
XT-2614E/2614Q with Gen 7 Base Stand
Please refer to the following instructions on how to switch among different
positioning modes to find an ideal viewing angle for XT-2614E/2614Q with
Gen 7 base stand. And, XT-2614Q will be used in the following demonstration.
1. Unpack XT-2614E/2614Q, which is supposed
to be set in flat folded mode, out of the
package box and then lay your POS system on
a flat surface.
2. Steady the base stand with one hand, and then
tilt the screen downwards.
4
Loading...