FCC Notes:
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
J of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his owns expense will be
required to take whatever measures to correct the interference.
Warranty Limits:
Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.
About This Manual:
Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors
or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise
damages, including without limitation loss of data or profits, resulting from the furnishing,
performance, or use of this material.
This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex Technology, Inc. reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide applicative
notices and arrangement for special options utilizing this product. The user may find the most up
to date information of the hardware from: http://www.posiflex.com or http://www.posiflex.com.tw
or http://www.posiflexusa.com
All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.
© Copyright Posiflex Technology, Inc. 2010
All brand and product names and trademarks are the property of their respective holders.
XP-3000/3300 Series
Fan Free Touch Terminal
User’s Manual
Rev.: B0
P/
N:
154809000
3
0
Page 1
ALERT TO OUR HONORABLE CUSTOMERS:
Please always read thoroughly all the instructions and documents delivered
with the product before you do anything about it. Don’t take any premature
action before you have a full understanding of the consequences.
DAILY MAINTENANCE GUIDE
For regular cleaning of the XP systems, please use only soft haired brush or
dry soft cloth. You may use moist soft cloth to remove stains when necessary.
Apply only suitable amount of mild neutral cleaner for obstinate stains. Please
note that never use Acryl dissolving solvent or Polycarbonate dissolving
solvent. You may apply ammonia-based glass cleaner only on the screen
surface.
ABOUT THIS PRODUCT
Posiflex XP-3000/3300 series presents a whole new generation POS terminal,
which is a combination of touch screen, printer, MSR, and the most reliable
FanFree system. This integrated solution of XP-3000/3300 series not only less
cable connection, but also carrying a brilliant performance to user in order to
face the busiest situation.
XP-3000/3300 Series applies Intel Pine View CPU technology; fast speed
Ethernet as well as plenty of connects ports of USB, Serial, VGA and CR ports.
It also integrated with thermal printer, touch screen and MSR, as well as
designed with gorgeous appearance and small footprint for counter space
saving. The small and fully integrated system is suitable for many kinds of
segments, such as general retailer, hospitality and restaurant. In addition, XP3000/3300 series terminal assist small and medium business to serve customer
effectively, speedy and precise.
All-in-one integrated system including touch screen, thermal printer and
MSR which is the best choice of POS system with limited space.
Integrated thermal printer with paper jams easy to fix design.
One touch power ON/OFF design provides convenience control for
terminal and printer.
The most reliable Fanfree structure for harsh environment.
Support Win POSReady, Win7 and Linux environment
Vertical type LCD panel with easy tilt angle adjustment
Supports SSD (Solid-State Drive) Data Storage Device or HDD
UPS function protects the system from intermittent power failure
External power support for COM 2/3 and VGA ports.
Page 2
INTRODUCTION
PRODUCT PICTURES
Front Views
Side Views
Rear & Bottom Views
1
2
4
5
6
7
8
9
10
11
14
15
16
17
9
12
13
Page 3
PARTS IDENTIFICATION
1. LCD display with touch panel
2. Printed paper exit
3. LED indicator for power and printer status
4. Paper feed button
5. Power switch
6. Brightness control buttons
7. Magnetic Stripe Reader(Option)
8. LCD adjustable Holder
9. Lock/Release button for tilt angle adjust
10. Printer cover
11. Printer cover release button
12. Three screw holes in back cover for customer pole display
integration
13. Cable Exit
14. Bottom plate compression lock
15. Bottom plate tenon
16. Rubber foot with bottom plate fixing screw
17. Bottom plate
PRODUCT FEATURES
Standard Features:
Models
Item
XP-3012H
XP-3015H
XP-3312H
XP-3315H
LCD Display
(TFT LCD Panel)
Digital 12"
Digital 15"
Digital 12"
Digital 15"
CPU
Intel Pine View D-SC 1.66G, 512K Cache
(Single core or Dual core)
VGA Port D-SUB 15Pin
DRAM Memory DDR2 667Mhz, Max 2GB (SO-DIMM X 1)
Serial Port
3, DB9 X 2, RJ-45 X 1 on the I/O Plate
CR Port X1, Control 2 cash drawers
Standard USB
Port
4 port on the I/O plate
Ethernet Port
10/100/1000 Mb
Touch Function USB Interface
Touch Sensor 5 Wire Touch Pad
Page 4
Storage device 2.5" SATA HDD or SSD HDD
Power switch On the top side
Power Saving
Suspension mode
Indicator LED and
Control panel
switch
Power ON/ standby, bi-color LED, Printer Error (RED),
Paper Out (RED), paper feed / power ON switch /
Brightness
control buttons.
Fan-Free system
Yes
OS support Windows XP Pro, WEPOS, POSReady, Win 7, Linux
Power Supply Power adaptor, 80W Power adaptor, 120W
Printer build in 3" Thermal Printer (60mm/sec)
3" Thermal Printer
(150mm /sec)
Printer auto cutter
Yes
Maximum Paper
roller diameter
80mm
Paper thickness
Less then 86µm
LCD panel tilt
angle
14~55 (degree)
Table: Summary of features
Models
Item
XP-3012E XP-3015E XP-3312E XP-3315E
LCD Display
(TFT LCD Panel)
Digital 12"
Digital 15"
Digital 12"
Digital 15"
CPU
Intel Pine View D-SC 1.8G , 512K Cache
(Single core or Dual core)
VGA Port D-SUB 15Pin
DRAM Memory DDR3 800Mhz, Max 4GB (SO-DIMM X 1)
Serial Port
3, DB9 X 2, RJ-45 X 1 on the I/O Plate
CR Port X1, Control 2 cash drawers
Standard USB
Port
4 port on the I/O plate
Ethernet Port
10/100/1000 Mb
Touch Function USB Interface
Touch Sensor 5 Wire Touch Pad
Storage device 2.5" SATA HDD or SSD HDD
Power switch On the top side
Power Saving
Suspension mode
Page 5
Indicator LED and
Control panel
switch
Power ON/ standby, bi-color LED, Printer Error (RED),
Paper Out (RED), paper feed / power ON switch /
Brightness
control buttons.
Fan-Free system
Yes
OS support Windows XP Pro, WEPOS, POSReady, Win 7, Linux
Power Supply Power adaptor, 80W Power adaptor, 120W
Printer build in 3" Thermal Printer (60mm/sec)
3" Thermal Printer
(150mm /sec)
Printer auto cutter
Yes
Maximum Paper
roller diameter
80mm
Paper thickness
Less then 86µm
LCD panel tilt
angle
14~55 (degree)
Table: Summary of features
Option Items:
Note: The underlined items in the following list means that option must be
set prior to shipment from the factory. The rest items can be set by the
dealers.
a) DDR2 SODIMM memory expansion up to 2GB max.
b) SATA SSD kit (SSD can’t coexist with SATA HDD in main unit).
c) Integrated upgrade kit:
2 or 3 track & JIS-II MSR
PD-309/309U, 2x20 LCD Customer display.
PD-330, 2x20 LCD Customer display.
PD-2605/2605U, 2x20 VFD Customer display.
PD-2606, 2x20 VFD Customer display.
PD-76X4 series, LCD 4x30 LCD pole display.
(PD-7614, PD-7624, PD-7634)
d) Integrated 2nd display 12”(LM/TM-2212)
e) Preload OS Windows XP Pro, WEPOS, Win 7, POS Ready or Linux
f) Wireless LAN adaptor in USB interface
g) UPS Battery.
h) RJ-45 to DB9 connector cable for COM3.
Loading...