Posiflex TX-4200E User Manual

P/

N:

14520900020

TX-4200/4200E/4200R

FCC Notes:

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with limits for a Class A digital device pursuant to subpart
B of Part 15 of FCC Rules, which are designed to provide reasonable protection against
interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his owns expense will be
required to take whatever measures to correct the interference.

Warranty Limits:

Warranty terminates automatically when any person other than the authorized technicians opens
the machine. The user should consult his/her dealer for the problem happened. Warranty voids if
the user does not follow the instructions in application of this merchandise. The manufacturer is by
no means responsible for any damage or hazard caused by improper application.

About This Manual:

Posiflex has made every effort for the accuracy of the content in this manual. However, Posiflex
Technology, Inc. will assume no liability for any technical inaccuracies or editorial or other errors
or omissions contained herein, nor for direct, indirect, incidental, consequential or otherwise
damages, including without limitation loss of data or profits, resulting from the furnishing,
performance, or use of this material.

This information is provided “as is” and Posiflex Technology, Inc. expressly disclaims any
warranties, expressed, implied or statutory, including without limitation implied warranties of
merchantability or fitness for particular purpose, good title and against infringement.
The information in this manual contains only essential hardware concerns for general user and is
subject to change without notice. Posiflex Technology, Inc. reserves the right to alter product
designs, layouts or drivers without notification. The system integrator shall provide applicative
notices and arrangement for special options utilizing this product. The user may find the most up
to date information of the hardware from: http://www.posiflex.com or http://www.posiflex.com.tw
or http://www.posiflexusa.com

All data should be backed-up prior to the installation of any drive unit or storage peripheral.
Posiflex will not be responsible for any loss of data resulting from the use, disuse or misuse of this
or any other Posiflex product.

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a
retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,
or otherwise, without prior express written consent from Posiflex Technology, Inc. the publisher of
this documentation.

© Copyright Posiflex Technology, Inc. 2013

All brand and product names and trademarks are the property of their respective holders.

Fan Free Terminal

User’s Manual

Rev.: A0

2 1 3

4

TX-4200

E Rear

View

ALERT TO OUR HONORABLE CUSTOMERS:

Please always read thoroughly all the instructions and documents delivered
with the product before you do anything about it. Don’t take any premature
action before you have a full understanding of the consequences.

DAILY MAINTENANCE GUIDE

For regular cleaning of the TX systems, please use only soft haired brush or
dry soft cloth. You may use moist soft cloth to remove stains when necessary.
Apply only suitable amount of mild neutral cleaner for obstinate stains. Please
note that never use Acryl dissolving solvent or Polycarbonate dissolving
solvent. You may apply ammonia-based glass cleaner only on the screen
surface.

ABOUT THIS PRODUCT

TX-4200/4200E/4200R Series is a multi-purpose controller that can be ideal
for various applications. With a compact housing, Intel Cedar view dual core
processor, standard VGA + HDMI display interface, mini-PCIe expansion slot
for WIFI, PS/2 port, VESA mounting and more, TX-4200/4200E/4200R Series
is so versatile that it can be used as a full fledge POS Box, a Kitchen Video
System (KVS) controller and a Digital Signage controller.

 The most reliable Fanfree structure for harsh environment.
 Supports Win POSReady 7/2009, Win7, Win XP pro environment.
 Supports SSD (Solid-State Drive) Data Storage Device or HDD.
 POS system for power saving (Suspension Mode).
 External power support for COM and VGA ports.
 CR port control maximum 2 cash drawers.
 Mini-PCI-E with USB port for TX-4200E/4200R.
 Desktop or Wall Mount Installation.
 VGA daughter card for 2nd VGA display.
 Option Power USB board to support 24V power USB for TX-4200E/R

only; a pair of rear-side 12V power USB ports to support TX-4200R.

TX-4200E Front View

INTRODUCTION

PRODUCT PICTURES

Page 2

1

TX-4200

Front View

2

3

TX-4200

Rear View

4

TX-4200

R Front

View

TX-

4200

R

Rear View

2

1

3

4

PARTS IDENTIFICATION

1. Power switch.

2. LED indicator for power and SSD indicator.

3. Power USB 24V port (TX-4200E/4200R)/USB port (TX-4200).

4. I/O plate (TX-4200/4200E/4200R) on the rear side (a pair of 12V
power USB ports on TX-4200R supported only , relatively

COM3/4 ports on TX-4200/4200E rear side).

PRODUCT FEATURES

Standard Features:

TX-4200E TX-4200 TX-4200R

ITEM SPECIFICATION SPECIFICATION SPECIFICATION

CPU Intel Cedar View

Chipset Intel NM10 Intel NM10 Intel NM10

VGA port D-SUB 15Pin -1

Display port N/A N/A Support DP display,

LCD display N/A N/A
DRAM
memory

D2550 1.86G, 1M
Cache, Dual Core

support +12V

DDR3 1066, SO­DIMM x 1 , Max
4GB

Intel Cedar View
D2550 1.86G, 1M
Cache, Dual Core

D-SUB 15Pin -1
support +12V

DDR3 1066, SO­DIMM x 1 , Max
4GB

Intel Cedar View
D2550 1.86G, 1M
Cache, Dual Core

D-SUB 15Pin-1
support +12V

not support Audio
Out function
N/A
DDR3 1066, SO­DIMM x 1 , Max
4GB

Page 3

45 X 2

45 X 2

HDMI port x1, on the I/O Plate

x1, on the I/O Plate N/A

x1 Need extension
Parallel port
PS/2 KB Yes, on the front

Serial port DB9 X 2, RJ-

Extension
slot

CR port Yes, one port

cable (option)

side

on the I/O plate,

COM5 & COM6

through special

convert cable.

COM 1/2/3/4

reserved + 5V

power enable by

software

setting,COM5/CO

M6 5V BY

JUMPER

SETTING,

COM1/2/3/4/5/6

reservd +12V by

Jumper Setting

Mini-PCI-E with

USB port, reserved

for external WiFi

Antenna

control 2 CRs on

the I/O Plate

x1 Need extension
cable (option)
Yes, on the front
side
DB9 X 2, RJ­on the I/O plate,
COM 1/2/3/4
reserved + 5V
power enable by
software
setting,COM5/CO
M6 5V BY
JUMPER
SETTING,
COM1/2/3/4/5/6
reserved +12V by
Jumper Setting

N/A

Yes, one port
control 2 CRs on
the I/O Plate

x 1 Need extension
cable (option)
Yes, on the front
side
DB9 X 2, COM1 &
COM2 through
special convert
cable. COM3/4 is
option. COM 1/2
reserved + 5V
power enable by
software setting,
COM1/2/3/4
reserved +12V by
jumper setting

Mini-PCI-E with
USB port, reserved
for external WiFi
Antenna

Yes, one port
control 2 CRs on
the I/O Plate

Page 4