How it Works
Posiflex
Loading...
SD-666W
User Manual
2 pgs452.52 Kb0

Posiflex SD-666W User Manual

SD-660/SD-666 SERIES
UPGRADE KIT
USER’S MANUAL
Rev. : A0
I. FEATURES
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio co mmunications. It has been tested and found to comply with limits for a C lass A digital device pursuant to subpart J o f Part 15 o f FCC Rules, which are designed t o provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case t he user at his own expense will be required to t ake whatever measures t o correct the interference.
WARRANTY LIMITS
Warranty will ter minate automatically when t he equipment is opened by any person other t han the authorized technicians. The user should co nsult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of t his merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Po siflex Technology, Inc. further disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire risk arising out of the use or performance of the software and documentation remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the upgrade k it SD-660/SD-666 for the Posiflex fan free touch terminals Jiva KS systems. This s eries of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to accommodate the required security specially involved in POS business, kiosk and hospitality operation. This manual covers t he conceptual and o perational aspects of these units. For technical aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.
The manufacturer of the SD-660/SD-666 series heartily apologizes to the user for reserving the r ight to change or to modify this manual without notice due to the rapid and constant pro gress and improvement on science and technology. The user may always obtain the most up to date information through any of our web sites: http://www.posiflex.com or http://www.posiflex.com.tw.
All rights are strictly reserved. No part of this documentation may be r eproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of Posiflex Technology, Inc. the publisher of this documentation
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Posiflex Technology, Inc. an ISO-9001 and ISO-14001 certified manufacturer. Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
Copyright Posiflex Technology, Inc. 2013
P/N: 19850904020
II. INSTALLATION
1. HARDWARE INSTALLATION
For SD-660/SD-666 series ordered with the host system KS series, it is installed on the system at delivery. For separately ordered SD-660/SD-666 series, it is delivered separately from the system and needs to be fixed onto the system per following instructions before use.
You may find two screw holes on back of the right side of the main unit of Jiva KS series. Remove these 2 screws to remove the cover for side mount upgrade kit. Take out the cable inside this cover as circled in right picture and connect it to connector inside the side mount upgrade kit SD-660/SD-666 as arrowed in same picture. Gently arrange the excessive length of this cable back in the hole and use the 2 original screws to fit SD-660/SD-666 back to the position originally occupied by the cover if the SD-660/SD-666 is not installed with the iButton reader (the circular marked cables would be present). Connection of this would not be necessary if the SD-660/SD-666 contains only the iButton reader (no MSR and no audio ports). Please reserve the cover if there is chance to have the side mount kit removed in the future.
When the SD-660/SD-666 is installed with iButton receptor, there will be 2 additional cables (marked with a circle in the above picture) coming out of the bottom side of SD­660/SD-666. Connect the longer to the DB9 COM ports for iButton reader setup (and data connection). Connect the shorter cable through a USB-PS/2 conversion cable as arrowed in the left picture to one of the USB ports inside cable cover area. Route the cables through the side
opening of the cable cover on KS series as illustrated in the right picture and close the cable cover. This paragraph of operations won’t be required if iButton reader is not installed on SD-
660/SD-666.
Page 1 / 2
2. DRIVER INSTALLATION
1. For iButton reader: The configuration of the iButton reader can be programmed through
Hyper Terminal function at the COM port that the DB9 type cable of SD-660/SD-666 is
connected to. The reader can be programmed to output through the USB port (connected
with the conversion cable) as an USB KB or through RS232 interface as the application
software requires. Please enter the “Hyper Terminal” function on KS system and select the
COM port. Type fully capitalized “SETUP” and press “enter” key. All available
configuration parameters will then be presented
2.
For MSR: The magnetic stripe reader in SD-660/SD-666, no matter how many tracks are
in the reader head, connects to the host through the proprietary internal USB port working
as a USB KB and therefore requires no driver installation. For application in OS other than
Windows (such as MS-DOS or Linux), some technical internal modifications will be
required and it is most advised to specify such conditions clearly when ordering the SD-
660/SD-666. For application of MS-DOS model please also enable the USB keyboard in
system CMOS setup. Refer to “Operation Guide” for manipulation over the reader
configuration.
III. OPERATION GUIDE
1. iBUTTON READER
Each iButton receptor is delivered with 2 iButton keys attached. Each iButton key carries a unique ID. Whenever the user places an iButton key to the reading area of the iButton reader, the key will stick to the reader by magnetism and the unique ID will be sent to the KS system through USB or RS232 interface as preprogrammed. Please approach your dealer for purchase of any additional iButton key required.
2. MAGNETIC STRIPE READER
For magnetic stripe card reading, be sure to insert the card to the bottom with magnetic stripe facing the mark aside the slot. The movement of the card can be either inserting the card from the top surface then sliding the card down out of the slot, or sliding the card upward from the lower side of the slot till it reaches the top end as long as the card is a standard one. A non­standard card recorded without complete degaussing prior to recovery may accept only one direction in card reading.
The MSR in SD-660/SD-666 reads an ISO or JIS magnetic stripe card without driver. Yet, there is a “Posiflex USB MSR Manager” program provided to control some parameter configuration for ISO MSR. The features controllable in this program covers: each track enable/disable, Alt+Num approach for ASCII codes and Leading/Stop code enable/disable. The function for enabling each track of course comes in effect only when the track is physically available. Please find in the Product Information CD delivered with KS system the folder “\Drivers\SD_Series\USBMSR_xxx” and “SetUp” this manager program or download the installation program from our web http://www.posiflex.com or http://www.posiflex.com.tw.
警告使用者
警告使用者
警告使用者警告使用者
這是甲 類的資 訊產品 ，在 居住的 環 境中 使 用 時 ， 可 能會 造 成 射 頻 干 擾，在 這種情 況下， 使用 者會被 要 求採取某些適當的對策。
Page 2 / 2
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use