Posiflex PD-2609UE User Manual
Package Contents
19460905010 Ver. Original
PD-2609UE
Rear-Mount Customer Display
User
Manual
PD-2609UE customer display (x 1)
Fixing screws (x 2)
User manual (x 1)
Product Features
Rear-mount VFD customer display for PS series POS terminal
Green or blue screen filter
Two-line display with 20 characters per line
Large character size for easy viewing: 9.03 mm x 5.25 mm
Various command emulation selecta ble by DIP switch: ADM, Aedex,
ESC/POS, Futaba, Noritake, UTC
12 international character sets support
1
LCD
USB Cable
Bracket with two Fixing Screw
DIP Switch Cover
USB Cable
Heat Dissipation Holes
Heat Dissipation Holes
Views of the PD-2609UE
Front View
Rear View
2
1. Locate the USB ports on the top side
2. Take the customer display out of the
3. Align the USB cable of the display
4. Connect the USB cable of
Mounting the PD-2609UE onto your POS Terminal
Please follow the below instructio ns to install the customer display onto your
POS terminal. During installat ion of PD-2609UE, do NOT power ON the
terminal.
of your terminal. Then, remove the
cover, when necessary, to access the
USB port. In the example, USB
ports are found on the rear of the
POS terminal.
PD-2609UE package box. Hold the
display and make sure that its cable
is placed above the bracket mounted
onto the rear side of the display.
with the USB port of your te rminal.
PD-2609UE to the USB port on the
top side of your terminal.
3
5. Take two screws out of the package
6. While tightening the screws, lea ve
7. By us ing a diagonal cutting nip per, break off the plastic tab off the rear
8. Align the two wedge tabs of the rear
box. Insert the screws into the lower
row of screw holes as indicated by
the arrows.
the screws loose enough to hold the
mounting br acket of the display as
shown in the figure .
I/O cover which you remove d from the POS terminal in t he Step 1.
I/O cover with the two wed ged
portion of the rear plate of the
terminal.
4
9. To keep the cable organized, tuck the extra cable into the I/O
10. Press the back cover into place.
11. Hang the bracket onto the screws.
12. Slide it into position along the ra il a s the b e low figures show.
compartment and thread the cable through the cable exit as shown in the
figure.
Cable Exit
5
Loading...