POSIFLEX PD-2100, PD-2200 User's Manual

PD- Series
USER’S MANUAL
VFD CUSTOMER DISPLAY for ALPHANUMERICAL DISPLAY in 2 x 20 format
Rev. : B4
SOME IMPORTANT NOTES
FCC NOTICE
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than the authorized technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard caused by improper application.
ABOUT THIS MANUAL
This manual assists the user to utilize the VFD customer display PD-2100 and PD­2200 series. Both series provide versatile font formats and support various instruction sets. These series of products receive instructions in serial communication protocols and is capable of entering pass through mode for PD-2200 so that all instructions received pass on to next connected serial device if properly configured.
The manufacturer of the PD-2100 and PD-2200 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of our web sites: http://www.posiflex.com.tw, http: //www.posiflexuk.com, http://www.posiflexusa.com.
Copyright Posiflex Inc. 2005
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Mustek Corp.. Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.
P/N: 19410900040
TABLE OF CONTENTS
FEATURES MODEL NUMBERS CARTON CONTENTS INSTALLATION
Signal Connection · · · · · · · · · · · · · · · · · · · · · · 4 - 1
For PD2100S/XX Series · · · · · · · · · · · · · · · · · · · 4 - 1
For PD2200B/XX Series · · · · · · · · · · · · · · · · · · 4 - 1
Power Connection & Mounting · · · · · · · · · · · · · · · · 4 - 1
Using Power Adaptor · · · · · · · · · · · · · · · · · · · 4 - 1 Using Power from PC · · · · · · · · · · · · · · · · · · · 4 - 2 Using Power from POS System · · · · · · · · · · · · · · · 4 - 3
Using printer power adaptor · · · · · · · · · · · · ·· · ·· 4 - 4
After Powering Up · · · · · · · · · · · · · · · · · · · · · · 4 - 4
MECHANICAL FEATURES
Dimension Drawings · · · · · · · · · · · · · · · · · · · · · 5 - 1 Display Frame Common Features · · · · · · · · · · · · · · · 5 - 2 Cushion Against Shock · · · · · · · · · · · · · · · · · · · · 5 - 2 Stand - Plate · · · · · · · · · · · · · · · · · · · · · · · · · 5 - 2
COMMAND EMULATION SPECIFICATIONS
Optical · · · · · · · · · · · · · · · · · · · · · · · · · · · · 7 - 1 Mechanical · · · · · · · · · · · · · · · · · · · · · · · · · · 7 - 1 Electrical · · · · · · · · · · · · · · · · · · · · · · · · · · · 7 - 1 Environmental · · · · · · · · · · · · · · · · · · · · · · · · 7 - 1
· · · · · · · · · · · · · · · · · · · · · · · · 1 - 1
· · · · · · · · · · · · · · · · · · 2 - 1
· · · · · · · · · · · · · · · · 3 - 1
· · · · · · · · · · · · · · · · · · · · 4 - 1
· · · · · · · · · · · · 5 - 1
· · · · · · · · · · · · · 6 - 1
· · · · · · · · · · · · · · · · · · · 7 - 1
i
I. FEATURES
Bright vacuum fluorescent display
Two-line display with 20 characters per line
Large characters for easy viewing (11.25mm by 7.2mm)
Long life and trouble free operation
Secure construction with bumper best for screw on operation in
PD2100 series. Generous base best for freely stand alone application in PD2200 series.
Two adjustable viewing angles
Pole height adjustable
Display frame is horizontally slidable, and 360° rotatable freely
Brightness adjustable by software
Simple installation
Direct interface connection with computers and peripherals
Standard Serial Interface for both series and with pass through
capability for PD2200 series.
Multiple choices for power supply source.
Supported in the code pages include PC437, Katakana, PC850
Multilingual, PC860 Portuguese, PC863 Canadian French, PC865 Nordic, Russia, Albic, PC437G Greek, W1257 Baltic, Greek and PC858 the code page contains Euro dollar sign at position D5h.
W1253
1 - 1
II. MODEL NUMBERS
Model
PD2100S Ivory PD2100S/C Charcoal PD2100S/D Ivory PD2100S/F Charcoal PD2100S/XX Ivory PD2100S/XX/C Charcoal PD2100S/XX/D Ivory PD2100S/XX/F Charcoal PD2200B Ivory PD2200B/C Charcoal PD2200B/D Ivory PD2200B/F Charcoal
PD2200B/XX PD2200B/XX/C PD2200B/XX/D
PD2200B/XX/F PD2201 Ivory
PD2201/C Charcoal PD2201/D Ivory PD2201/F Charcoal
Note:
1. For “/XX” models, “/XX” should be replaced by the country code for the
power plug type of the power adaptor such as “/US” or “/UK” etc. and the power to display unit is 12V AC. For models without “/XX”, the power used is + 12 V DC from PC through a power kit.
2. In “Base”: Small is 80 x 60 x 51(mm), Large is 220 x 110 x 41 (mm) and
PST means option device in PST system.
3. The “*” mark means the power source shared from the printer power adaptor
by means of a cable and is applicable in version Cxa / Dxa onwards only.
Case Color
Ivory Charcoal Ivory Charcoal
Display Color
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Green
Blue
Power Source
Kit
Adaptor
(+12V AC)
Kit DB9 F+M
Adaptor
(+12V AC)/
*Share from
printer
adaptor
(+24V DC)
+ 5 V DC
in connector
Base Connector
Small DIN 5 pin N. A.
Large
DB9 F+M
/ 3 pin jack
from printer
PST 10 pin RJ Yes
Pass Through
Yes
2 - 1
Loading...
+ 9 hidden pages