P/N: 19030900020
p. - 1
MR2000-2/MR2000-3/MR2000S-2/MR2000S-3/MR2000U-2/MR2000U-3
MAGNETIC STRIPE READER
Rev.: B
FEATURES:
l Double or triple tracks as indicated in MODEL IDENTIFICATION.
l Built-in keyboard wedge interface or RS232 interface or USB interface as
indicated in MODEL IDENTIFICATION.
l Built-in decoder
l Dual directional operation
l Interface cable included
l Heavy duty die-cast case
SOME IMPORTANT NOTES:
FCC NOTES
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to
comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own expense will be required to take whatever
measures to correct the interference.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than the authorized
technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the user does not follow the
instructions in application of this merchandise. The manufacturer is by no means responsible for any damage or hazard
caused by improper application.
The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind.
Mustek Corp. further disclaims all implied warranties including without limitation any implied warranties of merchantability
or of fitness for a particular purpose. The entire risk arising out of the use or performance of the software and documentation
remains with you.
ABOUT THIS MANUAL
This manual is written in an attempt with full strength to assist the user to utilize the stand-alone magnetic stripe
reader MR2000 series of Posiflex POS products. This series of products provide excellent flexibility and reliability in
application. This manual covers both operational and technical aspects of these units.
The manufacturer of the MR2000 series heartily apologizes to the user for reserving the right to change or to
modify this manual without notice due to the rapid and constant progress and improvement on science and technology. The
user may always obtain the most up to date information through our web site: http://www.posiflex.com.tw .
©
Copyright Mustek Corp. 2002
All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written
consent of Mustek Corp. the publisher of this documentation.
TRADE MARKS AND SERVICE MARKS
POSIFLEX is a registered trademark of Mustek Corp..
Other brand and product names are trademarks and registered trademarks and service marks of their
respective owners.
MANUFACTURED BY: MUSTEK CORP.
AN ISO-9001 AND ISO-14001 CERTIFIED MANUFACTURER
MR2000 Series User’s Manual
p. - 2
MODEL IDENTIFICATION:
MODEL NAME TRACKS APPLICABLE INTERFACE
MR2000-2 1 & 2 PS2 KB WEDGE
MR2000-3 1, 2 & 3 PS2 KB WEDGE
MR2000-JIS JIS I + II PS2 KB WEDGE
MR2000S-2 1 & 2 RS232
MR2000S-3 1, 2 & 3 RS232
MR2000U-2 1 & 2 USB
MR2000U-3 1, 2 & 3 USB
MR2000U-JIS JIS I + II USB
SPECIFICATIONS:
l Dimensions: 14.5 cm (L) X 3.7 cm (W) X 3.4 cm (H)
l Weight: 490 gm
l Rated voltage: 5 VDC
l Rated current: 100 mA max.
l LED: dual color -- green for good read or ready to read
red for invalid read
l Cable connection for KB WEDGE models (MR2000-2/3/JIS)
l Cable connection for RS232 interface models (MR2000S-2/3)
l Cable connection for USB interface models (MR2000U-2/3/JIS)
l Reader specification
Applicable card type ISO 7811 JIS X 6302
Card feed method Manual
Card feed direction Bi-direction
Read / write function Read only
Card feed speed 5 to 55 inches/sec. 100 ~ 1200 mm/sec.
Error rate Less than 0.5% Less than 0.1%
MR2000-2/3/JIS
PC
Keyboard
PC
Mini DIN 6 p Male Mini DIN 6 P Female
KB I/P
MR2000S-2/3
4 p RJ plug to CCBLA-141 power kit
D sub 9 P Female
to COM port
PC USB port or USB hub
MR2000U-2/3/JIS
Loading...