Posiflex LM-2008E User Manual

P/N: 1832

09000

10

LM-2008 / TM-2008

LCD / Touch Monitor

User’s Manual

Rev. Original

I. FEATURES

• 8” LCD monitor with tilt adjust for industrial and commercial use

• Application covers POS, POI (Kiosk), Factory Automation etc.

• High quality TFT LCD panel

• Spill proof and easy maintenance structure allowing easy cleaning

• Super VGA interface super resolution up to 800 x 600 pixels

• Support power supply through VGA cable from Posiflex POS systems to

operate without power adaptor

• Resistive type extra long life touch panel in USB interface (for TM-2008)

• Touch functions include left/right button, double click, drag & drop (for

TM-2008)

• Touch beep can be pitch adjusted/enabled/disabled by software control (for

TM-2008)

FCC NOTICE

used in accordance with the instructions manual, may cause interference to radio communications. It has been
tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules,
which are designed to provide reasonable protection against interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause interference in which case the
user at his own expense will be required to take whatever measures to correct the interference.

WARRANTY LIMITS

authorized technicians. The user should consult his/her dealer for the problem happened. Warranty voids if the
user does not follow the instructions in application of this merchandise. The manufacturer is by no means
responsible for any damage or hazard caused by improper application.

ABOUT THIS MANUAL

These series provide adjustable robust construction for 8” LCD display with maximum resolution of 800 x 600.
TM-2008 provides also a durable touch screen over the LCD panel.

the right to change or to modify this manual without notice due to the rapid and constant progress and
improvement on science and technology. The user may always obtain the most up to date information through
any of our web sites: http://www.posiflex.com, http://www.posiflex.com.tw, http://www.posiflexusa.com.

TRADE MARKS AND SERVICE MARKS

respective owners.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

Warranty will terminate automatically when the machine is opened by any person other than the

This manual assists the user to utilize the LCD Monitor LM-2008 and the Touch Monitor TM-2008.

The manufacturer of the LM-2008 and TM-2008 series heartily apologizes to the user for reserving

 Copyright Posiflex Technologies, Inc. 2009

POSIFLEX is a registered trademark of Posiflex Technologies, Inc..
Other brand and product names are trademarks and registered trademarks and service marks of their

Part 1

LM-2008

TM-

2008

“-”

LM-2008

TM-

2008

II. MODEL NUMBERS

LM-2008: 8” LCD Monitor on base stand
TM-2008: 8” LCD Touch Monitor on base stand

III. CARTON CONTENTS

1. LCD or Touch Monitor (Main unit assembled with Stand)

2. User’s Manual

3. Power Adaptor: 12V 18W, (21972018120 for USA)

4. VGA Cable: 21863241750

5. USB Cable: 21863250800 (for TM-2008 only)

6. Posiflex Product Information CD or DVD (for TM-2008 only)

IV. PARTS IDENTIFICATION

A. FRONT VIEW

B. LEFT SIDE VIEW

“OSD” --- OSD Menu/Submenu Engage Button

“EXT” --- OSD Menu/Submenu Exit Button

“+” --- Up/Increase Select/Setting Button

--- Down/Decrease Select/Set Button

Power Switch

Display Screen + Touch Panel

Main Unit

Display Screen

Power LED

Stand

Power Switch

Part 2

Main Unit

Base Back Cover Hook

LM-2008

TM-

2008

LM-

2008

TM-

2008

LM-

2008

TM-

2008

Main Unit

DC Jack

C. RIGHT SIDE VIEW

Sundries Trough

Base Stand

D. REAR VIEW

Base Back Cover

Base Stand

Cable Exit

E. CONNECTOR AREA

F. POWER LED INDICATION

• Orange: standby (no signal)

• Blue: operating

Hinge

Hinge

VGA Port

USB Port

Oval Cable Passage

DC Jack

Part 3