Posiflex JIVA XT-4215IR User Manual

XT-4215E-R
Fanless LCD Touch Terminal
User Manual
Package Contents
XT-4215E-R terminal
with Gen 7 base stand x 1
Recovery DVD (for pre-loaded
OS model only) (x 1) Information DVD (x 1)
Product Features
New slim design Powerful Intel® processor up to Core i7 3.9GHz (optional) New generation 7 foldable base that allows XT Series to be
configured into different configurations
VESA mounting for flexible deployment Compatible with side mount kit (SA-105Z/SA-205Z/SA-
305Z/SA-405Z) and rear-mount customer display (LM/TM­3010F/3014F/3015F/LM-6607 and PD­6607U/350UE/2608UE)
16670902010 Ver. Original
http://www.posiflex.com
1
Terminal from Flat Folded Mode to Full Extended Mode
In consideration of proper packaging, before shipping, the XT­4215E-R terminal is flat folded, staying in flat folded mode. Thus, when receiving the product, you will find that the terminal is well folded, as shown below.
Before operating this terminal, unfold it and make this terminal rise in full extended mode by referring to the following steps. Here, Posiflex’ another equivalent model with GEN 7E base is taken below for example.
1. Firstly, lift this terminal gently to make it to be unfolded.
2. Overturn this terminal in the direction as indicated by the arrow in the right figure.
2
3. Place this terminal on a flat table.
4. Tilt this terminal to a degree in the direction as indicated by the arrow below.
Terminal from Full Extended Mode to Flat Folded Mode
To fold this terminal, refer to the following steps.
1. Remove the cable cover.
2. Carefully hold the lower rim of the display.
3
3. Push the base-folding lever in the direction as indicated by the arrow below (1). Then, the display will be loosen and go down (2).
1
2
4. When the display goes down to a degree, loose the base­folding lever, as shown in the direction as indicated by the arrow below.
5. Then, gently tilt the display in the direction as indicated by the arrow below until the display is well folded.
4
Locking Hook
Power
LED
Indicator
6. Put back the cable cover.
Views of the XT-4215E-R
Front and Rear Views of Terminal with Gen 7 Base Stand
HDD Cover
LCD Touch Panel
Base Stand
Cable Exit
Cover of the DDR3 Memory and MSR
Left Side View of Terminal with Gen 7 Base Stand
Screw Holes for 2nd Display
Hinge for Main Unit
Neck Cover
Cable Cover
Power Button
Brightness Adjustment Button “+
Brightness Adjustment Button “-”
USB 2.0 Port
5
Loading...
+ 11 hidden pages