Posiflex JIVA XT-2614E User Manual

XT-2614E

Touch Terminal

User Manual

Package Contents

 XT-2614E x1
 User Manual x1
 Power Adaptor 12V/50W x1
 Power Cord x1

Views of XT-2614E

Front View Rear View

I/O Plate View

1x Line Out

USB1~2 port

1x OTG USB

16750901010 Ver. Original

http://www.posiflex.com

CO

M1~2 (DB9) port

1x Micro SD slot

1

1x LAN port

1 x DC IN power connector

1 x RESET button

Hardware Installation
Installation and Configuration of XT-

2614E

During Installation and configuration of XT-2614E,
please do NOT power ON your monitor and
terminal.

Start to install XT-2614E according to the following steps.

1. Find

2. After powering up for around 50~70

3. On the rear left side of the main unit, there

4. On the lower left corner of task bar, press

the DC IN jack on the I/O plate. Upon
connecting the included power adaptor to
the jack, XT-2614E will power up after a
while.

seconds, the operation screen is ready for
use.

are brightness adjustment push buttons.
Each single press continually on the + or –
brightness button changes the LCD panel
display brightness slightly.

Sound +/- buttons to increase/decrease
volumes, or scroll up/down the volume bar.

2